Publications Library

Titles in the areas of (In Process Measurments & Rheology)

IN PROCESS MEASUREMENTS & RHEOLOGY

Computer monitored thermoset injection moulding,
Polymer Processing Society 3rd Annual Meeting, Stuttgart, April (1987)
Coates P D and Sharp D A

In-line rheological measurement for control of polymer processing towards the intelligent processing machine,
Plenary paper, Proc.3rd Int. Conf. Polymer Processing Machinery, pp 6/1-8,July 1989, Bradford
Coates P D

In-line rheometry studies for process control of UPVC compounding,
Proc. 3rd Int. Conf. Polymer Processing Machinery, pp 13/1-9,July 1989, Bradford
Rose R M, Coates P D and Wilkinson B

Steady state control of UPVC compounding using in-line rheometry,
6th PPS Annual Meeting, Nice, April 1990
Rose R M, Coates P D, Day A J, Bartlett H and Wilkinson B

The use of in-line rheometry for real time control of gelation in UPVC compounding,
PVC Symposium, Loughborough University, September 1990 Rose R M, Coates P D and Wilkinson B

Modular nozzle rheometer for injection moulding control,
Proc. 4th Int. Conf. Polymer Processing Machinery,15/1-12, PRI (July 1991), London
Speight R G And Coates P D

In-line and on-line characterisation of the deformation processing of polymers,
Japan-British 'N+N' Meeting, Tokyo, June 1992.
Coates P D

The use of process measurements for real time injection moulding process control,
Proc. PPS 9, April 1993
Speight R G, Coates P D, Day A J and Hull J B

In-line rheometry in extrusion and injection moulding processing,
Proc. PPS 9, April 1993
Coates P D , Chohan R K, Groves D, Speight R G, Rose R M and Woodhead M

Converging flow measurements for injection moulding,
Proc. PPS 9, April 1993
Groves D, Chohan R K and Coates P D

Novel on-line rheometry for polymer extrusion,
Proc. PPS 9, April 1993
R M Rose+, P D Coates+, M Woodhead+, R Addleman and T Dobbie

In-line rheological measurements for extrusion process control,
Proc. Control of Extruders, Inst. Measurement & Control, Sept. 1993
Coates P D

The use of process measurements for real time injection moulding process control,
SPE Tech Papers, Vol XXXX, 696-700, May 1994
Speight R G, Coates P D and Hull J B

In line characterisation of polymer deformation in melt and solid phase processing,
Polymer, 35, No 18, 3831-3843 (1994)
Coates P D, Speight R G and Haynes A R

Towards intelligent control of polymer injection moulding,
AMST94, Ed. R Whalley, 365-378, Mechanical Engineering Publications Ltd, London, ISBN 0 85298 828 1, (March 1994)
Speight R G & Coates P D

On line rheometry of polymer melts: steady shear and entry pressure measurements,
Proc PPS European Meeting, 251-252, Strasbourg, (August 1994)
Kelly A, Coates P D, Dobbie T and Fleming D J

The use of in-line process measurements for injection moulding closed loop process control,
BPTA Process Quality Control Seminar, Telford (October 1994)
Speight R G, Coates P D and Hull J B

Modern sensor technology and benefits for injection moulding process control,
Mannesman Demag Hamilton Seminar (1994)
Speight R G, Yazbak E P, Hull J B and Coates P D

In-process measurements for monitoring and control of gelation levels in UPVC compounding,
Plast.Rubb.Comp.Process.Applicn., 23, 295-303 (1995)
Coates P D, Rose R M and Wilkinson B

Towards intelligent process control of injection moulding of polymers, Proc. I Mech E, part B, J. of Engineering Manufacture, Vol 209, 357-367 (1995)
Coates P D and Speight R G

*I Mech E Thatcher Bros Prize for best paper in Manufacturing

In-line rheological measurements for extrusion process control, Measurement & Control,
2 8, No1, pp10-16 (February 1995)
Coates P D

In-line pressure and infrared temperature measurements for injection moulding process control,
SPE Tech Papers, XXXXI, 647-650 (1995)
Speight R G, Yazbak E P and Coates P D

On line rheometry: shear and extensional flows,
Proc Polymer Process Engineering 95, Bradford (1995)
Kelly A L, Coates P D, Fleming D J & Dobbie T W

In line rheometry in injection, extrusion and melt spinning processes,
Proc Polymer Process Engineering 95, Bradford (1995)
Martyn M T, Kamala M, Groves D J & Coates P D

Intelligent monitoring for injection moulding control,
Proc Polymer Process Engineering 95, Bradford, Inst. Materials (1995)
Speight R G, Dawson A J, Coates P D, Peters C and Jagger R

Experimental observations and modelling of the flow behaviour of polymer melts through an abrupt contraction geometry,
Proc Polymer Melt Rheology, Aberystwyth, Sept 1995
Olley P, Kamala M, Martyn M and Coates P D

On-line rheometry of polymer melts: shear flow and entry pressure measurements,
Proc PPS Europe, Sept 1995
Kelly A L, Coates P D, Fleming D J, and Dobbie T W

Comparison of convergent flow models used to determine the transient extensional viscosities of polypropylene melts,
Proc PPS Europe, Sept 1995
Martyn M.T., Groves D.J., and Coates P.D.,

Computational fluid dynamics modelling and in-process flow measurements,
Proc PPS Europe, Sept 1995
Olley P., Kamala M., Martyn M.T., Nakason C, and Coates, P.D.

Real time process analysis during polymer melt processing using ultrasound technology,
Proc PPS Europe, Sept 1995
Brown E C, Speight R G, Coates P D, Coughlin J L and Farren P

Infrared sensor technology and benefits for injection moulding process control,
Proc PPS Europe, Sept 1995
Speight R G, Coates P D, Dawson A and Yazbak G

Predicting the Rheology of Linear with Branched Polyethylene Blends,
Rheologica Acta 35, 481- 493 (1996)
Groves D. J., McLeish T. C. B., Chohan R. K. and Coates P. D

Intelligent Monitoring for 100% automatic inspection of quality in injection moulding,
SPE Tech Papers, XXXXII, (1996)
Coates P D, Dawson A J, Key A, Peters C and Jagger R

Antec 2 SPE Tech Papers,
XXXXII, (1996)
Speight R G, Coates P D

Antec 3 SPE Tech Papers,
XXXXII, (1996)
Speight R G, Coates P D

In process monitoring of extrusion of filled polymers,
Keynote paper, Proc PPS 12, Sorrento, May 1996
Coates P D, Woodhead M, Barnwell D and Martin K

Flow visualisation and image analysis of convergent flows in extrusion,
Proc PPS 12, Sorrento, May 1996
Coates P D, Nakason C, Kamala M and Olley P

Intelligent Monitoring for 100% automatic inspection of quality in injection moulding,
Proc PPS 12, Sorrento, May 1996
Coates P D, Dawson A J, Key A, Peters C and Jagger R

On-line rheometry: shear & extensional flows,
Plast.Rubb.Comp.Process.Applicn, 25,No 7,313-318 (1997)
Kelly A L, Coates P D, Dobbie T W and Fleming D J

An Approximation to the KBKZ Consitutive Equation,
J Non Newt. Fluid Mech., 69, 239-254 (1997)
Olley P and Coates P D

Off line and In-process converging flow measurements for polyolefin melts,
Plastics Rubber & Composites Processing & Applications, 26, No.1, 13-22 (1997)
Groves D J, Martyn M T and Coates P D

In line process monitoring for injection moulding control,
Proc I Mech E Part E, 211, 115-128 (1997)
Speight R G, Coates P D, Hull J B and Peters C

The application of ultrasound measurement techniques to polymer melt processing,
Inst. of Physics Annual Congress, Leeds, pp 24-27, March (1997)
Brown E C, Coates P D and Olley P

Comparison Of Injection Moulding Simulation And In-Process Measurements,
SPE Tech Paps. XLIII, 1037-1041 (1997)
Leman Z, Coates P D and Maxfield R

Ultrasonic Velocity Dependence On Polymer Melt Variables
SPE Tech Paps. XLIII, 1042-1046 (1997)
Brown E C, Olley P and Coates P D

Visualisation Of Polymer Melt Convergent Flows In Extrusion
SPE Tech Paps. XLIII, 3702-3706 (1997)
Nakason C, Kamala M, Martyn M, and Coates P D

Image Analysis Of Polypropylene Melt Fibre Stretching
SPE Tech Paps. XLIII, 1108-1112 (1997)
Martyn M T and Coates P D

Comparison Of In Line, On Line And Off Line Rheometry Of Polyethylene Melts
SPE Tech Paps. XLIII, 1119-1123 (1997)
Woodhead M, Kelly A L, and Coates P D

New Aliphatic Polyketones: Injection Moulding In-Line Rheometry Studies
SPE Tech Paps. XLIII, 2092-2096 (1997)
Martyn M, Coates P D and Bonner J G

Image Analysis Of Polypropylene Melt Fibre Stretching,
Proc PPS13, Paper 7D (June, 1997)
Martyn M T and Coates P D

Visualisation Of Polymer Melt Convergent Flows In Extrusion
Proc PPS13, Paper 11E (June, 1997)
Nakason C, Kamala M, Martyn M and Coates P D

Injection Moulding: Integrating The Use Of Process Rheometry, Specific Pressure Integrals,
Taguchi Analysis And Modelling Proc PPS13, Paper 4A (June, 1997)
Coates P D, Dawson A J, Key A, Khoshooee N and Leman Z

Implementing Time Integral Constitutive Equations In General CFD Packages
Proc PPS13, Paper 9N (June, 1997)
Olley P, Spares R and Coates P D

Injection Process Monitoring and Process SPC, Polymer Process Engineering 97,
115-124, Ed P D Coates (Inst. Materials, London, 1997)
Dawson A J, Key A, Kamala M, Rose R M and Coates P D

Flow visualisation for extensional viscosity assessment, Polymer Process Engineering 97,
264-274, Ed P D Coates (Inst. Materials, London, 1997)
Nakason C, Kamala M, Martyn M T, Olley P and Coates P D

In line and On line rheometry of filled polyolefins, Polymer Process Engineering 97,
289-299, Ed P D Coates (Inst. Materials, London, 1997)
Barnwell D, Martin K, Kelly A L, Woodhead M and Coates P D

An Ultrasound virtual instrument approach towards melt flow measurement,
Proc PPS European & African Meeting, Gothenburg, August (1997)
Brown E C, Collins T, Olley P and Coates P D

Measuring the development of fibre orientation during the melt extrusion of short glass fibre reinforced polypropylene, Composites,
part A, 28 A, 949-958 (1997).
Hine P J, Tsui S-W, Coates P D, Ward I M and Duckett R A

In-Process Shear Flow Measurements in Extrusion and Injection Moulding,
ISBN 1 85143 171 3, Bradford University (1998),
Coates P D, Kelly A L, Rose R M and Woodhead M

Ultrasound: a virtual instrument approach for monitoring of polymer melt variables,
J.Reinf.Plast.Comp., in press (1998)
Brown E C, Collins T L D, Dawson A J, Olley P and Coates P D

Flow visualisation for extensional viscosity assessment,
SPE Tech Paps XLIV, 962-966 (1998)
Nakason C, Kamala M, Martyn M T and Coates P D

Infra-red temperature assessments in polymer melt flows,
SPE Tech Paps XLIV, 920-923 (1998)
Key A, Dawson A J, Rose R M and Coates P D

Ultrasound: a virtual instrument approach for monitoring of polymer melt variables,
SPE Tech Paps XLIV, 335-339 (1998)
Brown E C, Collins T L D, Olley P and Coates P D

Injection moulding: intelligent process monitoring to discriminate material and process variations,
SPE Tech Paps XLIV, 467-471 (1998)
Khoshooee N, Dawson A J, Key A Coates P D and Kumar S

Injection moulding process studies for polyketones,
SPE Tech Paps XLIV, 499-503 (1998)
Martyn M T Coates P D, Bonner J G and Davidson N

Visualisation and on-line sensing for polymer processing,
Proc. PPS-14, Paper S401-KN, 103-104, Yokohama, Japan (1998)
Coates P D, Nakason C, Kamala M and Martyn M T

Melt process monitoring of extrusion and injection moulding variables using ultrasound,
Proc. PPS-14, Paper S410, 121-122, Yokohama, Japan (1998)
E C Brown, T Collins, A J Dawson, P Olley, and P D Coates

Injection moulding nozzle measurements and associated process measurements in the laboratory and factory,
Proc. PPS-14, Paper G3-13, 366-367, Yokohama, Japan (1998)
A Dawson, A Key, N Khoshooee, C Panesar, R M Rose and P D Coates

Sensitivity of in-line rheometry for extrusion of Mg(OH)2 filled LDPE compounds.
International Polymer Processing XIII pp 172-182, Aug 1998.
Coates PD., Rose RM., Woodhead M., Kelly AL.

In-Process Entry Pressure Measurements in Extrusion and Injection Moulding. ISBN 1 85143 173X. 1998
Coates PD., Kelly AL., Rose RM., Woodhead M

On line, In line and off line rheometry of polyethylenes,
SPE Tech Paps XLV, May 1999
Kelly A L, Woodhead M, Rose R M and Coates P D

Observation of 3-d effects in flow visualisation of polymer melts, SPE Tech Paps XLV, May 1999
Coates P D, Matsuoka M, Kamala M and Martyn M T

Ultrasound investigation of process variation during single screw extrusion and injection moulding: real time detection of temperature profile and material degradation,
SPE Tech Paps XLV, May 1999
Brown E C, Collins T L D, Olley P and Coates P D

Injection moulding in-process measurements of batch to batch variation and process variable influences in polyamides,
SPE Tech Paps XLV, May 1999
Coates P D, Kelly A L, Woodhead M, Dawson A J, Martyn M T and Khoshooee N

Observation and quantification of 3-d effects in polymer melt entry flows,
Proc PPS-15, June 1999
Coates P D, Matsuoka M, Martyn M T and Kamala M

Ultrasonic monitoring of polymer melt flow,
Proc PPS-15, June 1999
Smith G D, Brown E C, Coates P D, Barnwell D, Martin K

Fibre orientation within an injection-moulded glass fibre reinforced nylon automotive pedal: comparison between experiment and software prediction,
Proc PPS-15, June 1999
Whiteside B R, Hine P J, Duckett R A, Coates P D

Ultrasonic investigations of process variation in-line during single screw extrusion and injection moulding: real time detection of temperature profile and material degradation
Proc PPS-15, June 1999
Brown E C, Olley P, Collins T L D, Coates P D

An automated velocity measurement of polymer melt flows through extrusion dies for comparison with finite element modelling,
Proc PPS-15, June 1999
Spares R, Olley P, Kamala M, Coates P D

Automated 1-d and 2-d strain analysis for in process strain measurements during uniaxial and constant-width deformation processes,
Proc PPS-15, June 1999
Collins T L D, Spares R, Sweeney J, Coates P D and Unwin A P

Comparison of thermocouple and infrared temperature measurements in polymer melt flows,
Proc PPS-15, June 1999
Woodhead M, Kelly A L, Key A, Rose R M and Coates P D

Flow behaviour of polyolefin melts processed through a convergent slit die of planar hyperbolic profile,
Proc PPS-15, June 1999
Martyn M T, Kamala M and Coates P D

In-line & off-line comparison of the rheometry of polyethylenes,
Proc PPS-15, June 1999
Kelly A L, Woodhead M, Rose R M and Coates P D

The effect of ends correction on wall slip velocity determination from capillary rheometry,
Proc PPS-15, June 1999
Kelly A L, Woodhead M, Rose R M and Coates P D

Modelling of gas assisted injection moulding and effects of processing on product mechanical properties,
Proc PPS-15, June 1999
Johnson L, Olley P, Coates P D

The effect of set melt temperature, back pressure, and screw speed on actual melt temperature in melt production stage of injection moulding:-
a D.O.E approach, Proc PPS-15, June 1999
Khoshooee N & Coates P D

Process monitoring of injection moulding batch to batch variation,
Proc PPS-15, June 1999
Kelly A L, Woodhead M, Rose R M and Coates P D

In-process rheometry and the development of injection moulding processing windows for aliphatic polyketones,
Proc PPS-15, June 1999
Martyn M T, Coates P D, Bonner J G and Davidson N

In-process extensional flow measurements in injection moulding and extrusion,
ISBN 1 85143 174 8, April 1999, University of Bradford.
Coates P D, Kelly A L, Martyn M T, Rose R M and Woodhead M

Visualisation of 3-d effects in melt flows,
172-179, PPE99 (Ed P D Coates), IoM Communications, London,
ISBN 1- 86125-094-0 (1999)
Martyn M T, Coates P D, & Matsuoka M

In line melt temperature measurement during real time ultrasound monitoring of single screw extrusion,
Plast.Rubb.Composites, 29, No.1, 3-13 (2000)
Brown E C, Olley P, and Coates P D

In process monitoring of apparent extensional viscosity of low density polyethylene melts using flow visualisation,
Plast.Rubb.Composites, 29, No.1, 14-22 (2000)
Martyn M. T., Groves D. J., and Coates P. D.

In process monitoring of polymer batch to batch variation in injection moulding,
Plast.Rubb.Composites, 29, No.1, 23-30 (2000)
Kelly A. L., Woodhead M., Rose R. M., and Coates P. D.

Gas assisted injection moulding: Finite element modelling and experimental validation,
Plast.Rubb.Composites, 29, No.1, 31-37 (2000)
Johnson L., Olley P., and Coates P. D.

Glass fibre orientation within injection moulded automotive pedal: Simulation and experimental studies,
Plast.Rubb.Composites, 29, No.1, 38-45 (2000)
Whiteside B. R., Coates P. D., Hine P. J., and Duckett R. A

Development of continuous die drawing production process for engineered polymer cores for wire ropes,
Plast.Rubb.Composites, 29, No.1, 46-50 (2000)
Taraiya A. K., Nugent M., Sweeney J., Coates P. D., and Ward I. M

Finite element simulation of geogrid manufacture using large deformation elastic formulation,
Plast.Rubb.Composites, 29, No.1, 51-58 (2000)
Caton-Rose P., Sweeney J., Collins T. L., and Coates P. D

Flow visualisation of polymer melts in abrupt contraction extrusion dies: quantification of melt recirculation and flow patterns,
J Non Newtonian Fluid Mech, in press (2000)
Nakason C,Martyn M T, Coates P D

Stress measurements for contraction flows of viscoelastic polymer melts,
J Non Newtonian Fluid Mech, in press (2000)
Martyn M T, Nakason C, Coates P D

Measurement of apparent extensional viscosities of polyolefin melts from real process contraction flows,
J Non Newtonian Fluid Mech, in press (2000)
Martyn M.T., Nakason C. & Coates P.D

Injection moulding temperature effects,
J. Inj Mould., in press (2000)
Speight R G, Rose R M and Coates P D

University of Bradford, School of Engineering