Publications Library
Titles in the areas of Manufacturing & Process control
|
Microprocessors
in Plastics Processing Control, |
|
Injection Moulding and the Application of
Microprocessors, published by the British Plastics Federation and PED of SERC, April 1980 |
|
Microprocessors in polymer processing machinery
control, Plast. Rubb.Int., 6, No.1, 15-17 (1981) |
|
Automatic Control in Plastics Processing,
Plenary Lecture, 6th European Plastics Conference, Societe Chimie Industrielle, Paris,7-9 June 1982 |
|
Microprocessors in polymer processing, Shell Polymers, 8, No.3, 69-73 (1984) also,, Il microcomputer nell'industria di trasformazione, Poliplasti, 329, 91-96 April (1985) [translation of no. J10] |
| In-line
rheological measurement for control of polymer processing -towards
the intelligent processing machine, Plenary paper, Proc.3rd Int. Conf. Polymer Processing Machinery, pp 6/1-8,July 1989, Bradford Coates P D |
|
In-line rheometry studies for process control
of UPVC compounding, Proc. 3rd Int. Conf. Polymer Processing Machinery, pp 13/1-9,July 1989, Bradford Rose R M, Coates P D and Wilkinson B |
|
Steady state control of UPVC compounding
using in-line rheometry, 6th PPS Annual Meeting, Nice, April 1990 |
| The
use of in-line rheometry for real time control of gelation in UPVC
compounding, PVC Symposium, Loughborough University, September 1990 Rose R M, Coates P D and Wilkinson B |
|
Analysis and Control of Polymer Processing,
Polymer Processing, Structure and Properties, R & D Clearing House, May 1991. |
|
Modular nozzle rheometer for injection moulding
control, Proc. 4th Int. Conf. Polymer Processing Machinery,15/1-12, PRI (July 1991), London |
| The
use of process measurements for real time injection moulding process
control, Proc. PPS 9, April 1993 Speight R G, Coates P D, Day A J and Hull J B |
|
Statistical
process control studies for single and twin screw extrusion, |
|
Investing in New Technology for Competitive
Advantage, Europ.Manag.J, 11, No.3, 367-376, Sept. (1993) |
| In-line
rheological measurements for extrusion process control, Proc. Control of Extruders, Inst. Measurement & Control, Sept. 1993 Coates P D |
| Intelligent
Polymer Processing, Materials World, 2, No.1,10-13, Jan 1994 Coates P D |
|
The use of process measurements for real
time injection moulding process control, SPE Tech Papers, Vol XXXX, 696-700, May 1994 |
| Towards
intelligent control of polymer injection moulding, AMST94, Ed. R Whalley, 365-378, Mechanical Engineering Publications Ltd, London, ISBN 0 85298 828 1, (March 1994) |
| The
use of in-line process measurements for injection moulding closed
loop process control, BPTA Process Quality Control Seminar, Telford (October 1994) Speight R G, Coates P D and Hull J B |
|
Modern
sensor technology and benefits for injection moulding process control, |
|
Digital image analysis
and the finite element modelling of the uniaxial drawing of polymers
in the solid phase, |
| Modelling
polymer processing using the necking network concept, MAFELAP 1996
Ninth conference on the Mathematics of Finite Elements and Applications,
Brunel University 25-28 June 1996 |
| Design
And Installation Of A Plant For Continuous Die-Drawing For Producing
Oriented Polypropylene Rods And Monofilaments SPE Tech Paps. XLIII, 1805- 1808 (1997) |
| Finite
Element Analysis Of Solid Phase Processing Of Polymers Using A Molecular
Based Constitutive Equation Proc PPS13, Paper 9L (June, 1997) Sweeney J, Caton-Rose P, Collins T L D, Coates P D & Ward I M |
| Finite
element analysis of solid phase polymer deformation using a molecular
based constitutive equation, ABAQUS User Conference, Milan, (1997) |
| Large
deformations of semicrystalline polymer modeled using the necking
network concept, ASME: J. Eng Matls Tech., 119, 228-232 (1997) Sweeney J, Collins T L D, Coates P D, Unwin A P and Ward I M |
| Application
of an elastic model to the large deformation, high temperature stretching
of polypropylene, Polymer, 38, No24, 5991-5999 (1997). |
| Evaluation
and validation of solid phase polymer material parameters for use
in ABAQUS UHYPER subroutine, Proc. ABAQUS Users Conference, 187-198, Newport RI, May (1998) Caton Rose, P, Sweeney J, Coates P D and Green S |
| Automated
1-d and 2-d strain analysis for in process strain measurements during
uniaxial and constant-width deformation processes, Proc PPS-15, June 1999 |
| Solid
phase polymer processing and the finite element method, Proc PPS-15, June 1999 Caton-Rose P, Sweeney J, Coates P D |
| Modelling
of solid phase deformation processing of polymers, 104-108, PPE99 (Ed P D Coates), IoM Communications, London, ISBN 1-86125-094-0 (1999) |
|
Modelling of solid phase deformation processing
of polymers, |
|
Microprocessors
in Plastics Processing Control, |
| Injection
Moulding and the Application of Microprocessors, published by the British Plastics Federation and PED of SERC, April 1980 |
| Microprocessors
in polymer processing machinery control, Plast. Rubb.Int., 6, No.1, 15-17 (1981) |
| Automatic
Control in Plastics Processing, Plenary Lecture, 6th European Plastics Conference, Societe Chimie Industrielle, Paris,7-9 June 1982 |
|
Microprocessors in polymer processing, Shell Polymers, 8, No.3, 69-73 (1984) also, Il microcomputer nell'industria di trasformazione, Poliplasti, 329, 91-96 April (1985) [translation of no. J10] |
| In-line
rheological measurement for control of polymer processing -towards
the intelligent processing machine, Plenary paper, Proc.3rd Int. Conf. Polymer Processing Machinery, pp 6/1-8,July 1989, Bradford Coates P D |
| In-line
rheometry studies for process control of UPVC compounding, Proc. 3rd Int. Conf. Polymer Processing Machinery, pp 13/1-9,July 1989, Bradford Rose R M, Coates P D and Wilkinson B |
|
Steady state control of UPVC compounding
using in-line rheometry, 6th PPS Annual Meeting, Nice, April 1990 |
| The
use of in-line rheometry for real time control of gelation in UPVC
compounding, PVC Symposium, Loughborough University, September 1990 Rose R M, Coates P D and Wilkinson B |
|
Analysis and Control of Polymer Processing,
Polymer Processing, Structure and Properties, R & D Clearing House, May 1991. |
|
Modular nozzle rheometer for injection moulding
control, Proc. 4th Int. Conf. Polymer Processing Machinery,15/1-12, PRI (July 1991), London |
| The
use of process measurements for real time injection moulding process
control, Proc. PPS 9, April 1993 Speight R G, Coates P D, Day A J and Hull J B |
| Statistical
process control studies for single and twin screw extrusion, Proc. PPS 9, April 1993 Coates P D, Rose R M, Woodhead M, and Ma X |
|
Investing in New Technology for Competitive
Advantage, Europ.Manag.J, 11, No.3, 367-376, Sept. (1993) |
| In-line
rheological measurements for extrusion process control, Proc. Control of Extruders, Inst. Measurement & Control, Sept. 1993 Coates P D |
| Intelligent
Polymer Processing, Materials World, 2, No.1,10-13, Jan 1994 Coates P D |
| The
use of process measurements for real time injection moulding process
control, SPE Tech Papers, Vol XXXX, 696-700, May 1994 |
| Towards
intelligent control of polymer injection moulding, AMST94, Ed. R Whalley, 365-378, Mechanical Engineering Publications Ltd, London, ISBN 0 85298 828 1, (March 1994) |
| The
use of in-line process measurements for injection moulding closed
loop process control, BPTA Process Quality Control Seminar, Telford (October 1994) Speight R G, Coates P D and Hull J B |
| Modern
sensor technology and benefits for injection moulding process control,
Mannesman Demag Hamilton Seminar (1994) Speight R G, Yazbak E P, Hull J B and Coates P D |
|
New
developments in process control for injection moulding,
|
| In-process
measurements for monitoring and control of gelation levels in UPVC
compounding, Plast.Rubb.Comp.Process.Applicn., 23, 295-303 (1995) Coates P D, Rose R M and Wilkinson B |
| Towards
intelligent process control of injection moulding of polymers, Proc. I Mech E, part B, J. of Engineering Manufacture, Vol 209, 357-367 (1995) *I Mech E Thatcher Bros Prize for best paper in Manufacturing. |
| In-line
rheological measurements for extrusion process control, Measurement & Control, 28, No1, pp10-16 (February 1995) Coates P D |
| In-line
pressure and infrared temperature measurements for injection moulding
process control, SPE Tech Papers, XXXXI, 647-650 (1995) Speight R G, Yazbak E P and Coates P D |
| Some
routes for tailoring of polymer properties through processing, IChemE
Transactions, ChERD, , 73, Part A, Special Edition on Materials, 753-770 (1995) Coates P D, Davies G R, Duckett R A, Johnson A F, and Ward I M |
| Intelligent
monitoring for injection moulding control, Proc Polymer Process Engineering 95, Bradford, Inst. Materials (1995) Speight R G, Dawson A J, Coates P D, Peters C and Jagger R |
| Infrared
sensor technology and benefits for injection moulding process control,
Proc PPS Europe, Sept 1995 Speight R G, Coates P D, Dawson A and Yazbak G |
| Intelligent
Monitoring for 100% automatic inspection of quality in injection moulding, SPE Tech Papers, XXXXII, (1996) Coates P D, Dawson A J, Key A, Peters C and Jagger R |
| Antec
2 SPE Tech Papers, XXXXII, (1996) |
| ,Antec
3 SPE Tech Papers, XXXXII, (1996) |
| Intelligent
Monitoring for 100% automatic inspection of quality in injection moulding,
Proc PPS 12, Sorrento, May 1996 Coates P D, Dawson A J, Key A, Peters C and Jagger R |
| Consistent
melt production through the use of Taguchi methods in injection moulding
quality control, Proc PPS 12, Sorrento, May 1996 Khoshooee N and Coates P D |
| Competitive
Strategies and new technology: an empirical investigation in the UK
polymer processing industry, R&D Managment, 2 6, No 4, 335-343 (1996) Butler R J, Coates P D, Pike R H, Price D H R and Turner R S |
| Developments
in Polymer Technology, Processing for China, 91-93 (1997) Coates P D |
| In
line process monitoring for injection moulding control, Proc I Mech E Part E, 211, 115-128 (1997) Speight R G, Coates P D, Hull J B and Peters C |
| Injection
Moulding: Integrating The Use Of Process Rheometry, Specific Pressure
Integrals, TaguchiAnalysis And Modelling Proc PPS13, Paper 4A (June, 1997) |
| Injection
Process Monitoring and Process SPC, Polymer Process Engineering 97, 115-124, Ed P D Coates (Inst. Materials, London, 1997) |
| Application
of Taguchi methods for consistent polymer melt production in injection
moulding, Proc I Mech E, part B, J. Eng Manufacture, 212, 611-620, 1998 |
| Injection
moulding nozzle measurements and associated process measurements in
the laboratory and factory, Proc. PPS-14, Paper G3-13, 366-367, Yokohama, Japan (1998) |
|
Organizing for Innovation:
Loose or
Tight Control?, Long Range Planning, 31, |
| Injection
moulding in-process measurements of batch to batch variation and process
variable influences in polyamides, SPE Tech Paps XLV, May 1999 |
| The
effect of set melt temperature, back pressure, and screw speed on
actual melt temperature in melt production stage of injection moulding a D.O.E approach, Proc PPS-15, June 1999 |
| Process
monitoring of injection moulding batch to batch variation, Proc PPS-15, June 1999 |
| In-process
rheometry and the development of injection moulding processing windows
for aliphatic polyketones, Proc PPS-15, June 1999 |
| Monitoring
batch to batch variation in injection moulding, 18-27, PPE99 (Ed P D Coates), IoM Communications, London, ISBN 1-86125-094-0 (1999) Kelly A L, Dawson A J, Key A, Woodhead M, & Coates P D |
| Fibre
orientation in an injection-moulded glass fibre reinforced nylon automotive
pedal: comparison between experiment and prediction 56-69, PPE99 (Ed P D Coates ), IoM Communications, London, ISBN 1-86125-094-0 (1999) |
| Modelling
of solid phase deformation processing of polymers, 104-108, PPE99 (Ed P D Coates), IoM Communications, London, ISBN 1-86125-094-0 (1999) |
| Ultrasonic
investigations of process variation in-line during extrusion and injection
moulding, 143-154, PPE99 (Ed P D Coates), IoM Communications, London, ISBN 1-86125-094-0 (1999) |
| In
process monitoring of polymer batch to batch variation in injection
moulding, Plast.Rubb.Composites, 29, No.1, 23-30 (2000) |
| In
line melt temperature measurement during real time ultrasound monitoring
of single screw extrusion, Plast.Rubb.Composites, 29, No.1, 3-13 (2000) |
| Gas
assisted injection moulding: Finite element modelling and experimental
validation, Plast.Rubb.Composites, 29, No.1, 31-37 (2000) |
| Glass
fibre orientation within injection moulded automotive pedal: Simulation
and experimental studies, Plast.Rubb.Composites, 29, No.1, 38-45 (2000) |
| Development
of continuous die drawing production process for engineered polymer
cores for wire ropes, Plast.Rubb.Composites, 29, No.1, 46-50 (2000) Taraiya A. K., Nugent M., Sweeney J., Coates P. D., and Ward I. M |
| Finite
element simulation of geogrid manufacture using large deformation
elastic formulation, Plast.Rubb.Composites, 29, No.1, 51-58 (2000) Caton-Rose P., Sweeney J., Collins T. L., and Coates P. D |
| Injection
moulding temperature effects, J. Inj Mould., in press (2000) |
|
|