Publications Library

Titles in the areas of Reactive Processing.

REACTIVE PROCESSING

An introduction to reinforced reaction injection moulding, Plast.Rubb.Process.Applicn., 1, No.3, 223-238 (1981) [PRI Silver Medal Award]
Coates P D and Johnson A F,

In-mould polymerisations involving vinyl monomers,
Proc. 1st Int. Conf. Reactive Processing, Univ. Pittsburgh Press (1981)
Johnson A F and Coates P D,

Fast reactive processing methods for the production of glass reinforced products,
Proc. BPF Reinf.Plast. Conf., Brighton, 8- 11, Nov. (1982)
Austen R C, Coates P D and Johnson A F,

Reinforced reaction injection moulding, Design Council Conference: Cost reduction and product improvement,
Bradford 20 May 1982 P D Coates and A F Johnson,

Reaction injection moulding reviewed,
Shell Polymers, 7, No.3, 75-79 (1983)
Johnson A F and Coates P D,

Case History: University of Bradford RRIM machine,
'Polycon '83: Reactive Processing', 100-105, PRI, London (1983)
Coates P D, Johnson A F and Sivakumar A I

RRIM processing machinery - the challenge,
'Polycon'83: Reactive Processing', 55-69, PRI, London (1983)
Coates P D,

Control of reinforced reaction injection moulding machinery, Instrumentation and Automation in the Paper,
Rubber, Plastics and Polymerisation Industries, ed. A R van Cauwenberghe, IFAC Proceedings Series, No.8, 273-280 (1984)
Coates P D, Sivakumar A I and Johnson A F,

RRIM Process measurements,
Proc. ACS Ann.Meet., Philadelphia (1984) Coates P D, Johnson A F and Sivakumar A I,

RRIM: Machine and process measurements,
Proc. 3rd Int. Conf. Reactive Processing, 95-106, Strasbourg (1984)
Coates P D, Sivakumar A I and Johnson A F,

RRIM: Process measurements on a computerised small scale machine,
Poly.Process.Eng.,3,(1-2), 159-172 (1985)
Coates P D, Sivakumar A I and Johnson A F,

Computer control of RRIM machinery,
Proc. 1st Int. Conf. Poly. Process. Mach., 13/ 1-9, PRI, London (1985)
Coates P D, Sivakumar A I, Johnson A F and Armitage P D,

RRIM: Computer control of injection,
Plast. Rubb. Process. Applicn., 6, No.2, 141-151 (1986)
[PRI Silver Medal Award]
Coates P D, Sivakumar A I and Johnson A F,

RRIM Machine and process measurements,
Poly. Process Eng., 4, (2-4), 219-234 (1986) Coates P D, Sivakumar A I and Johnson A F,

RRIM: Rheology of glass filled polyol slurries and polymeric isocyanate reagents,
Plast. Rubb. Process. Applicn., 7, 19-28, (1986) Coates P D, Sivakumar A I and Johnson A F,

Developments in RRIM for increased processing flexibility,
Plast. Rubb. Int. 11, No 6, 8-11, Dec.(1986)
Coates P D and Johnson A F,

Reinforced reaction injection moulding: exploring the machine - materials interface,
UTECH '86 Conf. Pap., 49-54, Den Haag, Crain Communications, London (1986)
Coates P D and Johnson A F,

Developments in reinforced reaction injection moulding for increased processing flexibility,
Poly.Processing: Automation '86, 24/ 1-11, PRI, London (1986) Coates P D and Johnson A F,

A computer controlled two component dispensing machine for robotic application of adhesives, in Adhesives, Sealants and Encapsulants '86:
Non- destructive testing, Applications and Environmental effects, Network Events, (1986) (ISBN 1 870208 013) Coates P D and Schafer D R,

Reaction injection moulding of interpenetrating polymer network systems: Aspects of the science and technology for an acrylic-polyurethane system,
Proc. 4th Int. Conf. Reactive Processing, Akron, October (1986)
Armitage P D, Coates P D, Hynds J, Johnson A F and Leadbitter J,

Modelling and Simulation of Bulk Polymerisation of Methylmethacrylate,
Royal Society of Chemistry Symposium 'Speciality Polymer Synthesis', Lancaster University, March 1986
Armitage P D, Coates P D and Johnson A F,

Structure-Property relationships in filled polyurethane based RIM materials,
Royal Society of Chemistry Symposium 'Speciality Polymer Synthesis', Lancaster University, March 1986
Leadbitter J, Coates P D and Johnson A F,

Modelling and Simulation of the formation of interpenetrating polymer networks in reaction injection moulding,
Royal Society of Chemistry, Polymerisation Discussion Group, Manchester University, May 1986
Armitage P D, Coates P D and Johnson A F,

Computer controlled multiple stream reinforced RIM,
Poly. Eng. Sci., 27, No 16, 1209-1215 (1987)
Coates P D, Johnson A F, Armitage P D, Hynds J and Leadbitter J,

Free radically initiated polymerisation for RIM and RRIM,
Makromol. Chem. Macromol.Symp. 10/11, 593-615 (1987)
Armitage P D, Coates P D, Hill S, Johnson A F, Mykytiuk J, Turner J M C,

Machine-materials interface in the RRIM process,
Macplas, 116-119, (1987); also translated into Italian in Macplas 84, 103-107 (1987). [derived from no. 26]
Coates P D and Johnson A F,

Novel Reinforced Reaction Injection Moulding (RRIM) Processing: Computer controlled multiple stream RRIM production of interpenetrating polymer networks and polyurethanes,
Polym. Eng. Sci., mid-September, 27, No.16, 1209-1215 (1987)
Coates P D, Johnson A F, Armitage P D, Hynds J and Leadbitter J,

Reaction injection moulding of polymer blends: An investigation of the morphology of an acrylic-urethane polymer,
Proc. 'Reinforced Injection Processing', PRI, Solihull, March (1987)
Armitage P D, Coates P D, Hynds J, Johnson A F and Leadbitter J,

Rapid novel composite formation by reactive injection,
Proc. 2nd Int. Conf. Polymer Processing Machinery, 17/1-13, PRI, July (1987)
Armitage P D, Coates P D, Hynds J, Johnson A F and Leadbitter J,

Reactively processed polymer composites for the automobile industry,
Proc. Autotech '87, London, December (1987)
Armitage P D, Coates P D, Hynds J, Leadbitter J and Johnson A F,

RRIM: Experimental studies of flow transients in mixheads,
Plast. Rubb. Process. Applicns, 8, 203-213 (1988)
Coates P D, Sivakumar A I and Johnson A F,

RRIM: Studies of steady injection flows in mixhead orifices,
Plast. Rubb. Process. Applicns, 10, 27-33 (1988)
Coates P D, Sivakumar A I and Johnson A F,

Reinforced Reaction Injection Moulding,
RAPRA Review Reports, 1, No 4, 1-81, Ed. R Meredith, 1988 (Pergammon Press)
Armitage P D, Coates P D and Johnson A F,

Reaction Injection Molding: Recent Developments,
Encyclopedia of Materials Science and Engineering,Supplementary Volume 1, pp 461- 472, Pergamon Press, (1988)
Coates P D and Johnson A F,

Rapid production of novel composites by RIM techniques,
Proc. 5th Int.Conf.Reactive Processing of Polymers, Sept. 1988, Bradford
Leadbitter J, Coates P D, Cerotti J, Hynds J, Johnson A F, and Ryan J,

Mould flows and post-mixhead rheology studies for poly(urethane-urea)s,
Proc. 5th Int.Conf. Reactive Processing of Polymers Sept. 1988, Bradford
Ryan J, Coates P D, Johnson A F, Hynds J and Patrick P,

Optimal control of RIM mixing heads,
Proc. 5th Int.Conf.Reactive Processing of Polymers, Sept. 1988, Bradford
Coates P D,

Modelling of high conversion processes, Proc. 5th Int. Conf.Reactive Processing of Polymers,
Sept. 1988, Bradford Coates P D, Reactive Processing Technology, Plenary Lecture, Proc. 5th Int.Conf.Reactive Processing of Polymers, Sept. 1988, Bradford
Armitage P D, Hill S, Coates P D and Johnson A F,

Reactive injection technology,
Plenary address, 5th Int.Conf. Reactive Processing of Polymers, Bradford, September 1988
Coates P D and Johnson A F,

Reactive injection of polymers, polymer blends and composites, PPS Regional Meeting, Brunel University, September 1988
Coates P D,

Mould flows and post-mixhead rheology studies for poly(urethane-urea)s,
Proc. Plast. Rubb. Process. Applicns, 13, No.2, 121-128 (1990)
Ryan J, Coates P D, Johnson A F, Hynds J and Patrick P,

Optimal control of RIM mixing heads,
Plast. Rubb. Process. Applicns, 13, No.2, 139-146 (1990)
Coates P D,

Reactive processing of polymers,
Plast. Rubb. Process. Applicns, 13, No.2, 71-74 (1990)
Coates P D,

Reactive processing of polymers for high performance products,
High Performance Plastics, May 1990, 1-7 (Elsevier Science Ltd)
Coates P D and Johnson A F,

Structural RIM studies,
33rd IUPAC Macro90, Montreal, July 1990
Coates P D, Johnson A F and Ryan J,

Nylon RIM, Int. Conf. on Thermal Characterisation of Polymers,
Windermere, April 1990
Pitfield A, Coates P D and Johnson A F,

Rheological die design for reactive extrusion, Pure and Applied Macromolecular Chemistry Group Conference on Polymer Characterisation 2,
Lancaster, September 1990
Coates P D, Fleming D, Johnson A F

Special Edition Guest Editor for Plastics and Rubber Processing and Applications special issue on Reactive Processing of Polymers (1990)
Coates P D,

Developments in Reactive Injection and Reactive Extrusion Processing, Proc. 4th Int. Conf. Polymer Processing Machinery,
10/1-16, PRI (July 1991), London
Coates P D And Johnson A F,

Mechanical Properties of Nylon Block Copolymer - Organic Fibre Composites,
Proc. 1st Int. Conf. Deformation and Fracture of Composites, 61/1-4, PRI (March 1991), London.
Long S D, Coates P D, Johnson A F,

Polyamide based composites produced by RIM,
Proc PPS Europ. Reg. Meeting, 1-17, 39-40, Palermo, Sept. 1991
Long S D, Pitfield A, Coates P D and Johnson A F,

Developments in reaction injection moulded materials: Polyurethanes, polymides and SRIM composites,
Macro Group UK Meeting "Aspects of Contemporary Polymer Chemistry", Lancaster, March 1991
Coates P D, Dawood I, Johnson A F, Long, S D, Patrick P, Tucker N, WongSSF,

Structural Reaction Injection Moulding of Polyamide and Polyurethane matrix- organic fibre composites,
Proc Utech 92, 305-308 Den Haag, Crain Communications, April 1992
Coates P D, Johnson A F, Long S D, Tucker N and Wong S,

Reactive Injection Processing of Polymers -Competitive Systems, Proc Utech 92 Seminar Series, Den Haag, Crain Communications, April 1992
Coates P D and Johnson A F,

Reaction Injection Moulding: Recent Developments, Concise Encyclopedia of Polymer Processing,
Ed Corish P J, 597-607, Pergamon Press (1992)
Coates P D and Johnson A F,

Reactive Processing of Polymers and Composites,
Materials World, 1, No.3, 156-160 (1993)
Coates P D and Johnson A F,

Structural Polymer Composites - an overview,
DTI/SERC LINK Structural Composites 1st Workshop, October 1992
Coates P D,

Novel residence time distribution and in line rheometry measurements in reactive extrusion,
Proc. PPS 9, April 1993
Johnson A F, Edwards H G, Ward N , Coates P D, andFleming D J,

Influence of processing parameter variation on the mechanical properties of a reaction injection moulded polyamide,
Proc. PPS9, April 1993
Long S D, Dawood I, Johnson A F and Coates P D,

In-shot ratio variation in RIM,
Proc. PPS9, April 1993
Coates P D, Johnson A F, Tucker N & Wong S S F,

Continuous Reaction Injection Moulding,
Proc. PPS9, April 1993
Coates P D, Johnson A F, Tucker N & Wong S S F,

The Bradford Multirim machine,
Proc. PPS9, April 1993
Coates P D, Johnson A F, Tucker N & Wong S S F,

Organic reinforced polymer matrix composites produced by SRIM, SPE Tech Papers,
Vol XXXX, 1654- 1658, May 1994
Coates P D, Long S D, Johnson A F, Tucker N and Wong S S F

Novel reaction injection moulding processing of polyurethanes: in shot ratio variation and twin mixhead injection,
SPE Tech Papers, Vol XXXX, 1659-1663, May 1994
Coates P D, Tucker N, Wong S S F and Johnson A F,

Novel twin mixhead RIM for controlled property variation in processing Polyurethanes,
Proc. UTECH 94, Paper 59/1-7, Crain Communcations, ISBN 1-85957-004-6, Den Haag (March 1994)
Coates P D, Johnson A F, Tucker N and Wong S,

Reaction injection moulding, Encyclopedia of Advanced Materials,
Ed. D Bloor, R J Brook, MC Flemings & S Mahajan, 2219-2230 Pergamon Press (1994)
Coates P D and Johnson A F,

Novel reaction injection moulding processing of Pus using in shot ratio variation and twin mixhead injection,
Proc PPS10, 126-127, Akron (April 1994)
Coates P D, Tucker N, Wong SSF and Johnson A F,

SRIM of organic fibre reinforced polymer matrix composites,
Proc PPS10, 128, Akron (April 1994) Coates P D, Long S D, Johnson A F Tucker N and Wong SSF,

Reactive Processing of Polymers,
RAPRA Review Reports 73 , Vol 7, No.1, pp1-136, 1994 (Pergammon Press) ISBN 1 85957 011 9
Brown M W R, Coates P D and Johnson A F,

Novel routes to tailored property/ property gradient polymer products by reactive injection processing,
Proc. European Physical Society 94, Eindhoven (July 1994) - keynote address
Coates P D and Johnson A F,

New polymers using novel reaction injection moulding (RIM) techniques,
35 IUPAC Symposium on Macromolecules, pp904, Akron (July 1994)
Brown E, Coates P D, Hull J B, Johnson A F, Tucker N and Wong SSF,

In process monitoring of REX modification of polypropylenes,
Proc PPS European Meeting, 58-59, Strasbourg, (August 1994)
Brown M W R, Johnson A F, and Coates P D,

In process monitoring of reactive extrusion modification of polypropylenes,
Polymat 94, IoMat, 276-279, September 1994
Brown M W R, Johnson A F, Tsui S-W and Coates P D,

Extending RIM methods for novel polyurethane products,
Proc. Polyurethanes USA, Boston, (September 1994)
Brown E, Coates P D, Hull J B, Johnson A F, Tucker N and Wong SSF,

Influence of Reaction Injection moulding (RIM) processing variables on the mechanical properties of a commercial linear segmented polyamide,
Plast.Rubb.Comp.Process.Applicn, 2 3, 161-174 (1995)
Long S D, Dawood I, Coates P D and Johnson A F,

Mechanical properties of organic fibre reinforced composites manufactured using structural reaction injection moulding,
Proc. PPS9, April 1993
Long S D, Johnson A F and Coates P D,

Novel reactive extrusion functionalisation of polyolefins:
in-process measurements SPE Tech Papers, XXXXI, 1620-1624 (1995)
Coates P D, Brown M W R, Fleming D J, Johnson A F and Tsui S-W,

Some routes for tailoring of polymer properties through processing,
IChemE Transactions, ChERD, , 73, Part A, Special Edition on Materials, 753-770 (1995)
Coates P D, Davies G R, Duckett R A, Johnson A F, and Ward I M,

Structural reaction injection moulding of polyethylene fibre reinforced epoxy composites,
Proc ICCE2, 155-156, New Orleans (1995)
Long S D, Coates P D, Johnson A F, Hine P J, Duckett R A and Ward I M,

Structural reaction injection moulding of polyethylene fibre reinforced epoxy composites,
Plast. Rubb. Process. Applicn, Plast. Rubb. Process. Applicn, Plast.Rubb.Process.Applicn, 24, No 5, 277-283 (1995)
Long S D, Coates P D, Johnson A F, Hine P J, Duckett R A and Ward I M,

Application of Raman Spectroscopy for determining residence time distributions in extruder reactors,
Applied Spectroscopy, 50, No 6, 812-815 (1996)
Ward N J, Edwards H G M, Johnson A F, Fleming D J and Coates P D,

Reactive Injection Processing - Chapter 8, in Thermosetting Plastics,
Moulding Materials and Processes, 2 nd Edition, Ed J F Monk, Longman, 1997
Coates P D and Johnson A F,

University of Bradford, School of Engineering