SqueezeBox.initialize({}); $$('a.modal').each(function(el) { el.addEvent('click', function(e) { new Event(e).stop(); SqueezeBox.fromElement(el); }); }); }); var K2RatingURL='http://www.edt.brad.ac.uk/';  

Subscribe to this RSS feed

New Course in Applied Physics (BSc)

 Physics helps with  environmental issues,global energy requirements, sustainable living, food production, healthcare etc....

 

Read more... Research


"Working with The University of gives us great access to a real intellectual powerhouse. We’ve been close to the University for many years and undertook our first KTP [Knowledge Transfer Partnership] project in 2010 "


Research has opened many doors for me that I did not know existed. Through research, I have been able to find what interests me and a group of people who have the same interests. 


 

 

 

Online Application

The easiest and quickest way to apply for postgraduate research courses at the University of Bradford is to use our online form.

 

The online application form can be found here:

 

http://www.bradford.ac.uk/postgraduate/courses/how-to-apply/

 

 

 

Downloadable Forms


PDF and Word versions of our research application form are available to print out and fill in by hand to type into and email back.

 

The downloadable forms are available here:

 

http://www.bradford.ac.uk/postgraduate/courses/how-to-apply/

 

The completed forms along with any supporting documents should be returned to This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

 

 

Supporting Documents


Along with an application form the following supporting documents are normally required:

 

sm-bullet Degree certificates/transcripts

 

sm-bullet Two references

 

sm-bullet Evidence of English language (if required)

 

sm-bullet A copy of your passport

 

sm-bullet You need to specify a research title and proposal (around 1000 words).

 

The proposal should consist of the following:

 

 

sm-bullet Set out the precise nature of the problem you wish to investigate. This should include a justification for your research, why the topic requires a closer look, and how it will make an original contribution to knowledge.

 

 

sm-bullet You should describe the groundwork you have already done, and be able to show that you are familiar with the existing literature in the field, and how your work will relate to that.

 

 

sm-bullet Finally, you should outline your proposed methodology, and indicate what materials or data you will need access to. 

 

 

If you apply online there is a facility to upload these documents at the end of the process. We prefer you to submit your application form and supporting materials electronically. This will help us to process your application more rapidly.

 

 

 



Read more... PG Research


"Working with The University of gives us great access to a real intellectual powerhouse. We’ve been close to the University for many years and undertook our first KTP [Knowledge Transfer Partnership] project in 2010 "


Research has opened many doors for me that I did not know existed. Through research, I have been able to find what interests me and a group of people who have the same interests. 


 

 

 

A research degree at University of Bradford would give you the opportunity to determine and work on your own field of study.

During your studies you are supported by two academics who you will meet with regularly.  Your supervisors will help formulate your research topic and ensure you are on schedule to complete your research on time. A research degree requires an in-depth study in a specialised area. A research student undertakes a major thesis, under the guidance of the supervisors.

The following degrees are offered by the School:

sm-bullet Master of Philosophy (MPhil)

sm-bullet Doctor of Philosophy (PhD)


 
 

Modes of Research:

It may be possible (with the department’s agreement) to combine two or more of these modes (listed in order of popularity):
 

Full-time Internal:

You will work alongside other students and staff in your department, and will be expected to complete the research for your PhD within three or four years.



Part-time Internal:

This mode is most suitable if you have a full-time job in a related area. You should live close enough to Bradford to maintain contact with your supervisor, and perhaps participate in research training. The minimum period for completion is four years.



Part-time External:

This mode may be available for students based overseas. You will need to visit Bradford at least once a year in order to have extensive discussions with your supervisor.



Full-time External:

This may suit people such as academics employed in institutions outside the UK. You should be able to commit an average of about 40 hours per week to your research, and be in a position to make regular use of library, computing or necessary equipment resources. You will need to meet your supervisor regularly and make at least one visit of two weeks or perhaps a month each year to Bradford to discuss the progress of your research.

 

 

 


Period of Study for a PhD:



Normal minimum period of registration


Normal maximum period of registration including writing-up period


Full-time doctorate


3 years


4 years


Part-time doctorate


4 years


7 years



Period of Study for an MPhil:



Minimum period of registration


Maximum period of registration


Full-time masters


1 year


2 years


Part-time masters


2 years


4 years



PhD Structure:

The first year of a full-time PhD is spent on an initial registration for MPhil. It may well be taken up with a review of existing literature in your proposed area, and the refining of your research proposal, combined with formal training in research skills in the Graduate School.

If you make good progress in your first year your academic supervisor will apply for your registration to be transferred from MPhil to PhD. If you opt nevertheless to submit for an MPhil then your remaining work should be accomplished in the following year.

The second year of your PhD programme may well be taken up with actual data collection. Towards the end of the year it should be possible to attempt an initial analysis of your results.

In the third year you may conduct detailed collation and analysis of your results, and organise them into a logical and persuasive thesis.

Following submission, your thesis will be read by two examiners. Your supervisor will also already have read your thesis, and may be consulted by the examiners. You will then be required to attend an oral examination, at which will be expected you to answer questions on your thesis.




Admission Criteria:

For the degrees of Doctor of Philosophy (PhD):

sm-bullet First or upper-second class degree of Bachelor at an approved university or institution

sm-bullet A higher degree at an approved university or institution

sm-bullet Exceptionally, candidates with lower than above but with experience and training as suitable preparation



For the degree of Master of Philosophy (MPhil):
 

sm-bullet Degree of Bachelor at an approved university or institution

sm-bullet Professional qualification approved by Research Degrees Committee and suitable general education and training

sm-bullet Exceptionally, candidates with less than above but able to give satisfactory evidence of having obtained adequate standard of knowledge may be accepted by the Research Degrees Committee


 


Note 1 : Candidates for the degree of Doctor of Philosophy are normally initially registered for the degree of Master of Philosophy and may only be transferred to PhD registration in accordance with procedures outlined in the Regulations for Research Degrees.

Note 2 We will check the approved University and degree award (where you have indicated at an approved university) with the National Recognition Information Centre for the United Kingdom (UK NARIC). NARIC is the National Agency, managed on behalf of the UK Government, and provides the only official source of information on international qualifications to organisations recruiting from overseas and to individuals wishing to work or study in the UK. You are free to contact NARIC at http://www.naric.org.uk who will be pleased to confirm your degree in comparison to a UK qualification. Please note there will be a charge for this service.

 



Language requirements:

For students whose first language is not English the University sets a minimum standard entry requirement of 6.0 IELTS with no subtest less than 5.5 or TOEFL language requirement is 84 with no sub-tests below; listening 17, reading 18, speaking 20, writing 17.

 

Fees:

Tuition Fees and Information can be found at:
http://www.brad.ac.uk/hub/TuitionFeesInformation/  



Read more...

EDT Celebrates receiving new Ford Blue Oval Scholarships

Bradford Engineering Students to benefit from £10K Scholarships

 

The school of Engineering Design and Technology at the University of Bradford is delighted to be a recipient of the Ford Blue Oval Scholarships to award to our students starting their engineering degree courses in 2012.

  Read more...

100% Employment Record for Graduates


According to official HESA figures, our employment statistics for Electrical & Electronic Eng. courses and our Mechanical engineering courses was 100%.

Read more...

The Professional Advisory Board (PAB) is a board of people external to the university, comprising qualified professional individuals, from a number of different disciplines, including relevant industry employers and government further education agencies, recent graduates, Alumni and representatives from Secondary and Further education. Board members are from local and national employers, large and small, in both the private and public sectors, representing the ‘voice of the outside world and its professional environment’ where graduates will aspire to. Each School of the University has its own dedicated PAB.

Professional Advisory Board Members

Rolton Group

Head of Design
Don Whitley Scientific
 

Technology Manager - Biomaterials

Smith & Nephew Research Centre

Technical Specialist - Cam Drive Systems

Ford Motor Company Ltd
 

Management Consultant

Impact Dynamics Ltd

Technology Director and Head of Airworthiness

Contour Premium Aircraft Seating


Manager - Applied Mechanics

Cummins Turbo Technologies Ltd
 
 
Chief Executive

Partners in Innovation Ltd


Graduate Trainee

Doncasters Ltd

 

Chief Engineer
Halifax Fan Ltd

Technical Director

CommAgility Limited

Area Flood Risk Manager

The Environment Agency

Chief Executive

BTAL House
 

Director

Rolton Group

Representative
University Council
 

Head of Manufacturing Shared Services

Balderstone


Chief Executive Officer

ICIPR Limited

The purpose of the board is to ‘provide a point of external reference for the School of Engineering , Design & Technology’s Operations, particularly those relating to Taught Programmes’ (undergraduate & postgraduate).  The goal is to provide professional advice to the School, aimed at helping to prepare graduates to the best possible standard of ‘readiness’ for the start of their career.  PAB activity and advice ranges from strategic business and administrative matters, to specific technological aspects, across the range of engineering disciplines taught in the school.



The Board meets formally twice a year at the University, engaging with the Dean and staff of the School, where matters of mutual benefit are discussed in an open forum.  Between the formal meetings, board members may liaise with staff and students on a more frequent basis, often related to University based projects that employers are running in conjunction with the School of EDT .  PAB members also attend specific School of EDT Student Project reviews and other certain University events, to promote and communicate an interest on behalf of industry and employers, providing support and encouragement to students.
 
 
 

Formal more detailed documents exist covering the PAB Charter and Terms of Reference.



The main advice, assistance and benefits that the PAB provide the School of EDT are summarised as:

 

 

sm-bullet   Direct links at a professional level with the outside world that students aspire to.


sm-bullet   An external review of the School of EDT operation.


sm-bullet   Identifying the needs of employers and the way in which those needs are met, including requirements of professional institutions.


sm-bullet Identification of any gaps and recommended changes and developments in course structure, curriculum and provision.


sm-bullet Student recruitment and course marketing.


sm-bullet Industrial training and placement arrangements.


sm-bullet Representation and advice on Research & Knowledge Transfer.

 

 

 

 

 


Read more...

100% Employment Record


According to official HESA figures, our employment statistics for Electrical & Electronic Eng. courses and our Mechanical engineering courses was 100%.

Read more...

Technology Management Read more...

Design Read more...

Popular

Links

Our Partners

TAG Cloud

Automotive Chemical Courses Design Electrical Electronics Event ICT Mechanical Medical Outreach Programme Team Projects Research Study (External)

nat_surv    

fairer (External)

youtube     (External)

facebook   

eco    


soedtict@bradford.ac.uk | April 2012

Change Text Only Settings

Graphic version of this page