| Programme | Booking | Publications | Demonstrations | ||||
| |
|||||||
| PPE
'03 - Tuesday 1 - Wednesday
2 July 2003 University of Bradford |
|||||||
| |
|||||||
| 8.45 |
Registration
& Coffee, D4 Foyer |
||||||
| 9.10 |
Welcome |
||||||
| SESSION 1: Injection Process Developments | |||||||
9.15 |
Micromoulding:
Interrogating the Process B Whiteside, M T Martyn, P D Coates, Bradford University / P Allan, G Greenway, P Hornsby, Brunel University |
||||||
| 9.45 |
Micromoulding
industrial developments |
||||||
| 10.10 |
Micromoulding
- alternative technology developments |
||||||
| 10.35 |
Coffee - exhibition area | ||||||
| 11.05 |
Novel
processes for injection moulding P Allan, M J Bevis, Brunel University / K Yasuda, Asahi Chemical Co. |
||||||
| 11.30 |
Evaluation
of Pulsed Cooling in Injection Mould Tools B A McCalla, P S Allan, P R Hornsby, A G Smith, L Wrobel, Brunel University / A L Kelly Bradford University |
||||||
12.00 |
Fluid-Assisted
Injection Processing G Smith, R Magalhaes R Hansell, Warwick University / P D Coates, A J Dawson, L Mulvaney-Johnson, M Woodhead, Bradford University |
||||||
12.25 |
Fibre
Orientation - Design-Performance Interactions in Short Fibre Reinforced
Composites R A Duckett, P Hine Leeds University / P Caton Rose Bradford University/ P Jittham, G Smith, Warwick University |
||||||
| 12.45 |
Lunch & Exhibition | ||||||
|
SESSION 2: Extrusion & other process developments
|
|||||||
| 13.45 |
Keynote: Process monitoring
along the extruder |
||||||
| 14.25 |
Using
Camera Vision Web Inspection as a QC tool S Dominey, Davis Standard Killion Inc |
||||||
| 14.50 |
Supercritical
Fluid Assisted Processing of Polymers P R Hornsby, S Matthews Brunel University / N Brooks, R Simpson Rapra Ltd |
||||||
| 15.15 |
Break | ||||||
| 15.30 |
High
throughput bicomponent microfibre production R Zhoa, E Eckhard, A Schwarz, Biax FibreFilm Inc |
||||||
| 15.55 |
Roller
die extrusion H Benkreira, J Paragreen, M Cox, R Patel, M Gale, Bradford University |
||||||
| 16.20 |
Blown
film – processing stability for metallocenes P Lafuente-Canas, B del Amo Fernandez.. Repsol s.a / G D Smith, R Spares, M T Martyn, Bradford University |
||||||
| 16.45 |
Laboratory demonstrations |
||||||
| 19.30 |
Reception
& Conference Dinner |
||||||
|
|
|||||||
| 8.45 |
Registration
& Coffee, D4 Foyer |
||||||
| SESSION 3: Sensors and Modelling & Control | |||||||
| 9.20 |
Keynote:In-Line
Monitoring of Dielectric and Fluorescence Spectroscopy During Polymer/Filler
Compounding A J Bur, S C Roth, Y-H M Lee, N Noda, NIST, Washington / M McBrearty, Chemical ElectroPhysics |
||||||
| 10.00 |
Melt
temperature fields measurements: instabilities and effects of screw
geometry on temperature fields E C Brown, A L Kelly, Bradford University |
||||||
| 10.25 |
Energy
measurements for non-invasive process monitoring A J Dawson, H Rajamani, P D Coates, Bradford University |
||||||
| 10.50 |
Coffee
- exhibition area |
||||||
| 11.20 |
Investigation
of Wave Interfacial Instabilities in Flat Coextrusion Dies: Simulation
and Experimental Research M Zatloukal, University of Zlin / M T Martyn, R Spares, P D Coates, Bradford University |
||||||
| 11.50 |
Biaxial
testing of plastics at high strain rates and temperatures E Harkin Jones, A Tshai, P Martin, Belfast University |
||||||
| 12.15 |
Gas
Assisted Injection Moulding: Process Setup and Optimisation Using a Rule
Based Expert System R G Speight, P Brincat, A Bakharev, Moldflow pty/ L Mulvaney Johnson, Bradford University |
||||||
| 12.45 |
Real-Time
Monitoring of Ethylene Vinyl Acetate Extrusion using Process Spectroscopy S Barnes, H Edwards, I Scowen, M Sibley, P D Coates, Bradford University/ W Baker, AT Plastics |
||||||
| 13.15 |
Lunch + Opening of Polymer CIC | ||||||
14.15 |
Modelling
and Control of Reactive Rotational Moulding B Crawford, N Corrigan, J Watterson, S. Raghunathan, R J Crawford, E Harkin-Jones, Belfast University, E C Brown, Bradford University |
||||||
| |
|||||||
| |
SESSION 4: Business and Environmental | ||||||
| 14.45 |
Faraday
Plastics: Roadmapping for the Plastics Industry N Brookes, N Tucker, R Simpson, Faraday Plastics |
||||||
| 15.15 |
Materials
and Products from UK-Sourced PVC-Rich Waste for New and Existing Markets R M Rose, A L Kelly, Bradford University / S Weston, WRAP |
||||||
| 15.40 |
Industrial
Support: Materials information service J Czerski, IoM3 Materials Information Service |
||||||
| 15.45 |
Industry
Support: The Regional Development Agency and its Role in Fostering Links
Between Higher Education and Business C Williams, Yorkshire Forward |
||||||
| 16.00 |
Tea
& End of meeting |
||||||
| |
Laboratory
demonstrations |
||||||
| |
|||||||
 |
 |
||||||