Professor Alastair Wood
- Title: Chair of Engineering Mathematics
- Email: A.S.Wood@Bradford.ac.uk
- Extension: 4281
- Room No. Chesham C1.14
- Qualifications: BSc (Hons) Applied Mathematics St Andrews PhD St Andrews
- Additional Role: Director of Internationalisation (Faculty)
- Additional Role: Erasmus & Study Abroad Coordinator (School)
- Research Groups: Automotive Research Centre
EDUCATION: graduated with BSc (Hons) Applied Mathematics (St Andrews, 1979) followed by PhD (St Andrews, 1984) in Computational Applied Mathematics supported by a CASE Award resourced by British Gas MRS (modelling synthetic natural gas production).
EMPLOYMENT: first academic position as Professor Auxiliar in Departamento de Estatistica, Investigacao Operacional e Computacao (DEIOC) at the Universidade de Lisboa, 1984-85 (required lecturing in Portuguese). Returned to UK as Lecturer in Mathematics (University of Manchester, 1986) and then, at the University of Bradford, as Lecture in Mathematics (1987), Senior Lecturer in Mathematics (1995), Reader in Engineering Mathematics (2002), and Personal Chair in Engineering Mathematics (2004). Appointed Dean of School of Engineering, Design, and Technology (2008-2013), and Interim Dean of School of Engineering and Informatics (2013-2014).
RESEARCH: current interests focus upon numerical optimisation (multi-disciplinary (MDO), response surface modelling, evolutionary methods, highly-constrained design spaces). Applications include engine calibration, model-based condition monitoring, petro-chem refinery process, and algorithm development. Research activity supports the delivery of a Master's module in Design Optimisation. I am a reviewer for the Georgian National Science Foundation, and referee for a numerical of good academic journals.
TEACHING: lecture across all engineering disciplines and stages in which engineering mathematics is required. For 2015/16 this comprised:
ENG1312L Engineering Mathematics (Chemical, Mechanical & Automotive, Medical, Intelligent Systems & Robotics), class size circa 150
ENG2307L Further Engineering Mathematics and Statistics (Mechanical & Automotive), class size circa 65
ENG4029M Design Optimisation (MSc & Stage 4 MEng, across all disciplines), class size circa 75
I coordinate the Mathematics Subject Team for the School of Engineering, and with colleagues in EECS am looking at how we might maximise the potential of the Faculty's cross-cutting theme of 'applied mathematics'.
INTERNATIONAL: Broader professional interests and activities include transnational education, partnership development, and internationalisation.
Lead internationalisation activity within the Faculty (partnerships, taught programmes, recruitment, etc.) and manage student exchange programmes for the School of Engineering.
Lecture at Sichuan University (Chengdu, China), delivering a Masters-level summer school course, and deliver an MSc module at Wuhan University of Technology (China).
Linked to TNE I have worked with NCUK for some 15 years (as Senior Mathematics Examiner), and I currently chair their Delivery Quality Committee. NCUK deliver International Foundation Year and Diploma programmes in country for students aspiring to study in the UK. The University of Bradford is a Trustee of NCUK.
STAFF DEVELOPMENT: mentor new and established academic colleagues, informal mentor for senior academic promotion case developments.
Reviewer for Georgian National Science Foundation
International Scientific Committee for
Dr Yu Houyu [+ Dr Qi] 01/03/2016-28/02/2017
China Scholarship Council award holder
Aleks Korsunovs [+ Prof Campean, Dr Olley] 09/2015
Abhishek Mistry [+ Prof Campean] 04/2014
Le Qui [+ Dr Qi] 01/2013
Vasos Themi [+ Prof Campean] 2012
PhD TITLE (Jaguar)
Shahid Maqsood [+ Prof Khan] 2013
PhD Scheduling manufacturing systems with AI techniques towards optimal/sub-optimal solutions
Peter Clarke [+ Dr Olley] 2013
PhD Multi-scale modelling of heat transfer in nano-manufacturing
Xuefei Yin [+ Prof Campean] 2012
PhD Application of MDO to engine calibration optimisation (Jaguar)
Aysar Jarullah [+ Prof Mujtaba] 2011
PhD Optimising TBR operating conditions for hydro-treatment of crude oil
Antosh Lewalski [+ Prof Ebrahimi] 2011
PhD Short distance telemetry for piston monitoring
Kambiz Rezapour [+ Prof Ebrahimi] 2011
PhD Optimising thermal performance of internal combustion engines
Chetan Lakhanpal [+ Dr Olley] 2010
MPhil Mathematical modelling of applied heat transfer in temperature sensitive packaging systems
Philipp Meise [+ Prof Day] 2009
PhD Energy flow in regenerative braking for road vehicles
A Nikranjbar [+ Prof Ebrahimi] 2009
PhD Model-based mixed eccentricity fault diagnosis of cage induction motor using particle swarm optimisation
KIANIFAR M.R., CAMPEAN F. and WOOD A.S. (2016): "Application of permutation genetic algorithm for sequential model building model validation design of experiments" Soft Computing, 20 (8): 3023-3044.
For more information see: http://dx.doi.org/10.1007/s00500-015-1929-5
Qi H.S., Alzaabi R.N., Wood A.S. and Jani M. M.(2015): "A fuzzy criticality assessment system of process equipment for optimised maintenance management" Intl J Computer Integrated Manufacturing, 28 (1): 112-125.
For more information see: http://dx.doi.org/10.1080/0951192X.2013.814160
Rezapour K., Mason B.A., Wood A.S. and Ebrahimi M.K. (2014): "Bi-fuel SI engine model for analysis and optimization" Universal J Mechanical Engineering, 2 (2): 71-82.
For more information see: http://dx.doi.org/10.13189/ujme.2014.020207
Maqsood S., Khan M.K., Wood A.S. and Hussain I. (2013): "A novel heuristic rule for job shop scheduling" Intl J Customer Relationship Marketing & Management, 4 (1): 28-40.
For more information see: http://dx.doi.org/10.4018/jcrmm.2013010103
Jarullah A.T., Mujtaba I.M. and Wood A.S. (2012): "Whole crude oil hydrotreating from small-scale laboratory pilot plant to large-scale trickle-bed reactor: analysis of operational issues through modelling" Energy & Fuels, 26 (1): 629-641.
For more information see: http://dx.doi.org/10.1021/ef201406r
Jarullah A.T., Mujtaba I.M. and Wood A.S. (2012): "Improving fuel quality by whole crude oil hydrotreating: a kinetic model for hydrodeasphaltenization in a trickle bed reactor" Applied Energy, 94 182-191.
For more information see: http://dx.doi.org/10.1016/j.apenergy.2012.01.044
Maqsood S., Noor S., Khan M.K. and Wood A.S. (2012): "Hybrid genetic algorithm (GA) for job shop scheduling problems and its sensitivity analysis" Intl J Intelligent Systems Technologies & Applications, 11 (1/2): 49-62.
For more information see: http://dx.doi.org/10.1504/IJISTA.2012.046543
Jarullah A.T., Mujtaba I.M. and Wood A.S. (2011): "Kinetic parameter estimation and simulation of trickle bed reactor for hydro-desulfurization of crude oil" Chemical Engineering Science, 66 (5): 859-871.
For more information see: http://dx.doi.org/10.1016/j.ces.2010.11.016
Maqsood S., Khan M.K. and Wood A.S. (2011): "Novel heuristic for low-batch manufacturing process scheduling optimisation with reference to process engineering" Chemical Product & Process Modeling, 6 (2): Art 8, 12pp.
For more information see: http://dx.doi.org/10.2202/1934-2659.1602
Jarullah A.T., Mujtaba I.M. and Wood A.S. (2011): "Modelling and optimization of crude oil hydrotreating process in trickle bed reactor: energy consumptions & recovery issues" Chemical Product & Process Modeling, 6 (2): Art 3, 21pp.
For more information see: http://dx.doi.org/10.2202/1934-2659.1600
Jarullah A.T., Mujtaba I.M. and Wood A.S. (2011): "Improvement of the middle distillate yields during crude oil hydro-treatment in a trickle-bed reactor" Energy & Fuels, 25 (2): 773-781.
For more information see: http://dx.doi.org/10.1021/ef101327d
Jarullah A.T., Mujtaba I.M. and Wood A.S. (2011): "Kinetic model development and simulation of simultaneous hydro-denitrogenation and hydro-demetallization of crude oil in trickle bed reactor" Fuel, 90 2165-2181.
For more information see: http://dx.doi.org/10.1016/j.fuel.2011.01.025
Nikranjbar A., Ebrahimi M.K. and Wood A.S. (2010): "Parameter identification of cage induction motor using particle swarm optimization" Proc IMechE Part I: J Systems & Control Engineering, 224 (5): 479-491.
For more information see: http://dx.doi.org/10.1243/09596518JSCE840
Rezapour K., Ebrahimi K.M., Wood A.S. and Nikranjbar A. (2010): "Simulation and modelling of bi-fuel engine for improving the performance parameters" SAE, Paper 2010-01-2034 13pp.
For more information see: http://dx.doi.org/10.4271/2010-01-2034
Li J-P. and Wood A.S. (2009): "Species-conserving particle swarm optimisation for multimodal functions" Int J Modelling, Identification & Control, 8 (4): 290-300.
For more information see: http://dx.doi.org/10.1504/IJMIC.2009.030075
Li J-P. and Wood A.S. (2009): "An adaptive species conservation genetic algorithm for multimodal optimization" Int J Numer Meths Engng, 79 (13): 1633-1661.
For more information see: http://dx.doi.org/10.1002/nme.2621
Nikranjbar A., Ebrahimi M. and Wood A.S. (2009): "Model-based fault diagnosis of induction motor eccentricity using particle swarm optimization" Proc IMechE Part C: J Mechanical Engineering Science, 223 (3): 607-615.
For more information see: http://dx.doi.org/10.1243/09544062JMES1113
Zadeh P.M., Toropov V.V. and Wood A.S. (2009): "Metamodel-based collaborative optimization frameworks" Struct Multidisc Optim, 38 (2): 103-115.
For more information see: http://dx.doi.org/10.1007/s00158-008-0286-8
Wood A.S., Mosally F. and Al-Fhaid A. (2009): "On high-order polynomial heat balance integral implementations
" Thermal Science, 13 (2): 11-25.
For more information see: http://dx.doi.org/10.2298/TSCI0902011W
- HOUYU Y, WOOD AS, HUANG M and QI HS (2016): "Optimal braking control for an independent four wheel-motor-driven electric vehicle", IET 6th Hybrid & Electric Vehicle Conference, (HEVC 2016), 2-3 November, London, UK.
- QIU L, QI HS and WOOD AS (2016): "Analysis of the interface heat partition in a friction brake system with 2D FE models", EB2016-FBR-016, EuroBrake 2016, 13-15 June. 15/06/16., Milan, Italy.
- Qiu L, Qi HS and Wood AS (2015): "A new paradigm for disc-pad interface models in frictions brake systems", Proceedings EuroBrake 2015, 4-6 May, Dresden, Germany.
Kianifar MR, Campean F and Wood AS (2014): "Formulation of a sequential DoE framework using a PermGA algorithm", 14th IEEE Annual Workshop Comp Intell (UKCI 2014),, Bradford, UK.
For more information see: http://dx.doi.org/10.1109/UKCI.2014.6930172
- Rezapour K., Ebrahimi M.K. and Wood A.S. (2012): "Exergy analysis of a bi-fuel SI engine", 9th Intl Conf Heat Transfer, Fluid Mechanics & Thermodynamics (HEFAT 2012), 405-411. 16-18 July, Malta.
Qi H.S., Liu Q., Wood A.S. and Alzaabi R.N. (2012): "Fuzzy criticality assessment for process equipments maintenance", Intl Conf Automatic Control & Artificial Intelligence (ACAI 2012), 1094-1097. 3-5 March, Xiamen, China.
For more information see: http://dx.doi.org/10.1049/cp.2012.1168
Jarullah A.T., Mujtaba I.M. and Wood A.S. (2012): "Economic analysis of an industrial refining unit involving hydrotreatment of whole crude oil in trickle bed reactor using gPROMS ", Computer Aided Chemical Engineering (22nd European Symp Computer-Aided Process Engineering (ESCAPE-22)) [Ed. IDL Bogle, M Fairweather], 30, 652-656 (2012). ISBN: 978-0-444-59519-5 , London, UK.
For more information see: http://dx.doi.org/10.1016/B978-0-444-59519-5.50131-3
Bradley W., Victory J., Ebrahimi M., Wood A.S. and Pestell C. (2011): "Model-based diagnosis of induction motor failure modes", IEEE Conf Emerging Technologies and Factory Automation (ETFA 2010), 1-4, 13-16 September (2010). ISSN: 1946-0740, Print ISBN: 978-1-4244-6848-5, Bilbao, Spain.
For more information see: http://dx.doi.org/10.1109/ETFA.2010.5641297
Li J-P. and Wood A.S. (2011): "Reliability redundancy optimization using MOEA/D", Proc 11th IEEE Annual Workshop Comp Intell (UKCI 2011), 32-36, 7-9 September (2011)
, Manchester, UK.
For more information see: http://ukci.cs.manchester.ac.uk/files/Proceedings.pdf
Tariq M., Majeed H., Li J-P. and Wood A.S. (2011): "On the usefulness of worst individuals in multimodal optimization", Proc 11th IEEE Annual Workshop Comp Intell (UKCI 2011), 87-92, 7-9 September (2011) , Manchester, UK.
For more information see: http://ukci.cs.manchester.ac.uk/files/Proceedings.pdf
- Maqsood S., Hussain I., Khan M.K. and Wood A.S. (2011): "A novel index-based heuristic for job shop scheduling", CARs&FoF 2011, [Ed. MK Khan, NL Win], Vol 1, 433-440, 26-28 July (2011). ISBN: 978-983-44947-3-5, Kuala Lumpur, Malaysia.
- Maqsood S., Noor S., Khan M.K. and Wood A.S. (2011): "Sensitivity analysis of genetic algorithms for job shop scheduling problems", CARs&FoF 2011, [Ed. MK Khan, NL Win], Vol 1, 594-602, 26-28 July (2011). ISBN: 978-983-44947-3-5, Kuala Lumpur, Malaysia.
Jarullah A.T., Mujtaba I.M. and Wood A.S. (2011): "Enhancement of productivity of distillate fractions by crude oil hydro-treatment: development of kinetic model for the hydro-treating process", Computer Aided Chemical Engineering (21st European Symp Computer-Aided Process Engineering (ESCAPE-21)) [Ed. EN Pistikopoulos, MC Georgiadis, AC Kokossis], 29, 261-265. 29 May – 1 June, Chalkidiki, Greece.
For more information see: http://dx.doi.org/10.1016/B978-0-444-53711-9.50053-5
- Qi H.S., Alzaabi R.N., Wood A.S. and Jani M. (2011): "A fuzzy criticality assessment system of process equipment for optimized maintenance management", 7th Intl Conf Digital Enterprise Technology (DET 2011) [Ed. G Chryssolouris, D Mourtzis], 392-401, 28-30 September (2011). ISBN: 978-960-88104-2-6, Athens, Greece.
Li j-P., Campean F. and Wood A.S. (2010): "Reliability-inspired species conservation for multimodal function", 10th IEEE Annual Workshop Comp Intell (UKCI 2010), 1-6, 8-10 September (2010). ISBN: 978-1424487745 , Colchester, UK.
For more information see: http://dx.doi.org/10.1109/UKCI.2010.5625606
Li J-P., Li X-D. and Wood A.S. (2010): "Species-based evolutionary algorithms for multimodal functions: a brief review", IEEE Cong Evolutionary Comp (CEC 2010), 1-8, 18-23 July (2010). ISBN: 978-1424469093, Barcelona, Spain.
For more information see: http://dx.doi.org/10.1109/CEC.2010.5586349
- Maqsood S., Khan M.K. and Wood A.S. (2010): "A review of AI techniques for manufacturing scheduling", CARs&FoF 2010, [Ed. **], Vol *, **-**, 13-16 July (2010). ISBN: 978-983-44947-3-5, Pretoria, South Africa.
- Bradley W., Victory J., Nikranjbar A., Ebrahimi M. and Wood A.S. (2010): "Models of cage induction motors for current monitoring", Proc 7th Intl Conf Condition Monitoring & Machinery Failure Prevention Technologies (CM 2010), Paper 317, 22-24 June (2010), Stratford, UK.
- Yin X.F., Campean I.F., Wood A.S., Seale W.J. and Goodman M. (2009): "Automatic optimisation strategies for diesel engine calibration", DoE in Engine Development [Ed. K Röpke], §13, 162-175 (2009). ISBN: 3816917712 [Invited], Berlin , Germany.
Li J-P. and Wood A.S. (2009): "Random search with species conservation for multimodal functions", IEEE Cong Evolutionary Comp (CEC 2009), 3164-3171, IEEE Pres, 18-21 May (2009). ISBN: 978-1424429585, Trondheim, Norway.
For more information see: http://dx.doi.org/10.1109/CEC.2009.4983344
- Li J-P. and Wood A.S. (2008): "Introduction to adaptive species for finding multiple solutions of complex optimization problems", Proc 8th Intl Conf Adaptive Computing Design & Manufacture (ACDM 2008), 141-148, 29 April – 1 May (2008). ISBN: 0955288509, Bristol, UK.