Skip to content

Professor Phil Coates,
Professor of Polymer Engineering

Information about Professor Phil Coates at the University of Bradford.

School of Engineering
(Faculty of Eng & Digital Technologies)
Email:
p.d.coates@bradford.ac.uk
Telephone:
+44 1274 234540

Biography

Professor Phil Coates is a Physics graduate (Imperial College), London. His PhD research was on solid phase deformation processing of polymers (Leeds University). He was elected a Fellow of the Royal Academy of Engineering in 1995, and was Pro Vice Chancellor for Research & Knowledge Transfer at Bradford for 7 years (2004-11), and is Professor of Polymer Engineering, at the University of Bradford. He is Director of the internationally recognised Polymer Interdisciplinary Research Centre (IRC) (Leeds, Bradford, Durham and Sheffield Universities), with 50 researchers at Bradford involved in leading edge in-process measurements, process monitoring, analysis and control, and computer modelling in a 4500 m2 laboratory. The research targets high value polymer products for a range of sectors – healthcare technology (especially orthopaedic applications), pharmaceuticals processing, optical, automotive and advanced materials developments, including nanocomposites and reactive grafting, all with pioneering in-process measurement and modelling. He is a director of MeDe Innovation, EPSRC Centre of Innovative Manufacturing in Medical Devices, founded in 2013. His research has substantial support (>£50 million total grants and contracts) from UK Government sources and industry, with >150 companies in the USA, Europe, the Middle East, China, Australia and Japan. His research involves strong academic cooperation in the UK, Europe, N America, India, Japan and particularly China. He directs the RCUK Bradford Science Bridges China programme – a government sponsored collaboration (with > £16m total UK and China support to date) with >20 Chinese Universities focussed on advanced materials for healthcare technologies. He co-founded (with Prof Li Guangxian, senior Vice President of Sichuan University) the UK-China Advanced Materials Research Institute (www.ukchina-amri.com ) in 2012, which maps onto our continuing Science Bridges China platform, which continues to thrive with researcher exchanges. He is an Honorary Professor of Sichuan University and Beijing University of Chemical Technology, and a Molecular Sciences Forum Professor at both the Institute of Chemistry, Chinese Academy of Sciences, Beijing and CIACAS Changchun. He has three joint laboratories with many joint high level publications and research exchanges with leading Chinese groups: (1) Sichuan University State Key Laboratory of Polymer Materials Engineering, on Polymer Microprocessing, 2010 –a MOST ‘national international’ laboratory (2014), with a range of joint international grants from EPSRC, MOST, NSFC and MoE in China; (2) Changchun Institute of Applied Chemistry Chinese Academy of Sciences, in Polymer Process Physics, 2015 with joint grants (RAEng Engineering Fellowship (2014-5) and a Royal Society Newton Advanced Fellowship (Prof Y Men, 2015-18), and (3) Beijing University of Chemical Technology on Soft Matter Technologies (2016). He is also a Famous Overseas Scholar and member of the National Bureau of Foreign Experts of China. In addition, Prof Coates is involved with research in India, particularly in the leading Institute for Chemical Technology, Mumbai and the CSIR National Chemical Laboratory, Pune.Prof Coates was a director of Medilink (Y&H) Ltd (2004-18). He was a founder member of the Leeds City Region Local Enterprise Partnership Business, Innovation and Growth Panel (for 8 years, part as chairman), and has continued to promote the international potential for links. He was honoured with the Institute of Materials (IOM3) Netlon Gold Medal for Innovation in Polymer Processing (1999); the Plastics Industry Award for personal contribution to the industry (2006); the IOM3 Swinburne Award (2008); the Tianfu Friendship Award of Sichuan Province (2015); the Sichuan International Cooperation Award (2106); the JL White International Innovation Award of the international Polymer Processing Society (2017); the National Science & Technology Award for International Cooperation of the People’s Republic of China (2017) – China’s highest honour for foreign scientists; and the International Award 2018 of the Society of Plastics Engineers, their top award. He is a long-standing member of the International Polymer Processing Society committee, and has organised a wide range of international conferences, and regularly gives invited, keynote and plenary lectures. He has published extensively – over 300 papers in scientific journals and has co-authored 9 books, and edited 7 books. He holds 15 patents. He is Chief Editor of the IoM3 international journal, Plastics, Rubber and Composites: Macromolecular Engineering. He is married to Jane (for over 47 years), with four children and four grandchildren; in addition to family, his chief interests are in music, his church and computers. Web sites: www.polyeng.com = the gateway web site to Prof Coates’ laboratories at Bradford, www.ukchina-amri.com and www.sciencebridgeschina.co.

Research

Phil is Director of the internationally recognised Polymer Interdisciplinary Research Centre. Phil's polymer engineering research targets high value polymer products for a range of sectors – healthcare technology (including bioresorbable polymers for orthopaedic applications; ultra-precision moulding e.g. of polymer surfaces; arterial stents), oriented polymer technologies (extensively commercialised), pharmaceuticals processing, optical, automotive and advanced materials developments, including nanocomposites and reactive grafting; circular economy issues for polymers includes long-standing research on PVC recycling, and more recent international collaborations on difficult to recycle/ epicycle polymers. All of these processes used in Phil's research have pioneering in-process measurement, and modelling, and all are aimed at structuring polymers for enhanced properties.

Publications

There are 358 publications involving or that are attributed to Professor Phil Coates.

Peer Reviewed Journal

Professor Phil Coates has 358 publications listed under peer reviewed journal.
Title Year Publication name Journal Volume Pages Authors Editors ISSN Publisher DOI Location
A non-isothermal experimental and simulation study of residual wall thickness in Gas Assisted Injection Moulding 2006 Olley, Peter; Mulvaney-Johnson, Leigh; Coates, Philip D.
Real-time diagnostics of gas/water assisted injection moulding using integrated ultrasonic sensors 2007 Mulvaney-Johnson, Leigh; Cheng, C-C.; Ono, Y.; Brown, Elaine C.; Jen, C.K.; Coates, Philip D.
Modelling the large strain constitutive behaviour of polycarbonate under isothermal and anisothermal conditions 2005 Sweeney, John; Caton-Rose, Philip D.; Coates, Philip D.
Rheological characterisation of hydroxapatite filled polyethylene composites. Part I - Shear and extensional behaviour. 2001 Joseph, R.; Martyn, Michael T.; Tanner, K.E.; Coates, Philip D.; Bonfield, W.
Improved detection of Sugarcane yellow leaf virus using a real- time fluorescent (TaqMan) RT-PCR assay. 2002 Korimbocus, J.; Coates, David; Barker, I.; Boonham, N.
Real-time diagnosis of micro powder injection molding using integrated ultrasonic sensors. 2007 Cheng, C-C.; Ono, Y.; Whiteside, Benjamin R.; Brown, Elaine C.; Jen, C.K.; Coates, Philip D.
Application of a large deformation viscoelastic model to the unstable necking of polyethylene 2002 Sweeney, John; Coates, Philip D.; Collins, T.L.D.; Duckett, R.A.
Fibre orientation 2005 Caton-Rose, Philip D.; Coates, Philip D.; Duckett, R.A.; Hine, P.J.
Visualisation and analysis of interfacial instability in the co-extrusion of a LDPE melt 2004 Martyn, Michael T.; Coates, Philip D.; Spares, Robert; Zatloukal, M.
Raman spectroscopic studies of the cure of dicyclopentadiene (DCPD) 2009 Brown, Elaine C.; Barnes, S.E.; Coates, Philip D.; Corrigan, N.; Edwards, Howell G.M.; Harkin-Jones, E.
Fibre orientation structures and their effects on crack resistance of injection moulded transverse ribbed plate 2004 Coates, Philip D.; Caton-Rose, Philip D.; Duckett, R.A.; Hine, P.J.
Micromoulding: process measurements, product morphology and properties. 2004 Whiteside, Benjamin R.; Martyn, Michael T.; Coates, Philip D.; Greenway, G.; Allen, P.; Hornsby, P.
Effect of polymer matrix on the rheology of hydroxapatite filled polyethylene composites. 2002 Martyn, Michael T.; Joseph, R.; McGregor, W.J.; Tanner, K.E.; Coates, Philip D.
Antibiotic-resistant acne: lessons from Europe 2009 Snelling, Anna M.; Coates, Philip D.; Cove, J.H.; Ross, Jeremy I.
Production of monoclonal antibodies to sugarcane yellow leaf virus using recombinant read-through protein. 2009 Coates, David; Danks, C.; Korimbocus, J.; Preston, S.; Boonham, N.; Barker, I.
In-process vibrational spectroscopy and ultrasound measurements in polymer melt extrusion 2003 Scowen, Ian J.; Barnes, S.E.; Coates, Philip D.; Sibley, M.G.; Edwards, Howell G.M.; Brown, Elaine C.
Suppression of necking in polyethylene. 2002 Unwin, A.P.; Duckett, R.A.; Ward, Ian M.; Collins, T.L.D.; Sweeney, John; Coates, Philip D.
Real-time ultrasonic diagnosis of polymer degradation and filling incompleteness in micromoulding. 2005 Whiteside, Benjamin R.; Brown, Elaine C.; Ono, Y.; Jen, C.K.; Coates, Philip D.
Functional Redundancy of two nucleoside transporters of the ENT family (CeENT1, CeENT2) required for development of Caenorhabditis elegans. 2009 Appleford, P.J.; Griffiths, M; Yao, S.Y.; Ng, A.M.; Chomey, E.G.; Isaac, R.E.; Coates, David; Hope, I.A.; Cass, C.E.; Young, J.D.; Baldwin, S.A.
Neutron-mapping polymer flow: scattering, flow visualization and molecular theory. 2003 Bent, J.; Hutchings, L.R.; Richards, R.W.; Gough, Timothy D.; Spares, Robert; Coates, Philip D.; Grillo, I.; Harlen, O.G.; Read, D.J.; Graham, R.S.
Comparison of injection moulding machine performance. 2005 Kelly, Adrian L.; Woodhead, Michael; Coates, Philip D.
The effect of screw geometry on melt temperature profile in single screw extrusion. 2006 Kelly, Adrian L.; Brown, Elaine C.; Coates, Philip D.
Recycling of uPVC window profile waste 2007 Kelly, Adrian L.; Coates, Philip D.; Rose, R.M.; Weston, S.
Measuring and predicting the dynamics of linear monodisperse entangled polymers in rapid flow through an abrupt contraction: a small angle neutron scattering study 2006 Gough, Timothy D.; Bent, J.; Graham, R.S.; Hutchings, L.R.; Coates, Philip D.; Richards, R.W.; Groves, D.J.; Embery, J.; Nicholson, T.M.; McLeish, T.C.B.; Likhtman, A.E.; Harlen, O.G.; Read, D.J.; Grillo, I.
A unified model of necking and shear banding in amorphous and semicrystalline polymers 2007 Coates, Philip D.; Sweeney, John; Caton-Rose, Philip D.; Spares, Robert
Effect of hydroxyapatite morphology/surface area on the rheology and processability of hydroxyapatite polyethylene composite. 2009 Joseph, R.; McGregor, W.J.; Martyn, Michael T.; Turner, K.E.; Coates, Philip D.
Melt temperature field measurement in single screw extrusion using thermocouple meshes. 2004 Brown, Elaine C.; Kelly, Adrian L.; Coates, Philip D.
Rheological characterisation of hydroxapatite filled polyethylene composites. Part II - Isothermal compressibility and wall slip 2001 Martyn, Michael T.; Coates, Philip D.; Joseph, R.; Tanner, K.E.; Bonfield, W.
Ultrasonic measurement of residual wall thickness during gas assisted injection moulding. 2007 Mulvaney-Johnson, Leigh; Brown, Elaine C.; Coates, Philip D.
Water assisted injection moulding: development of insights and predictive capabilities through experiments on instrumented process in parallel with computer simulations. 2008 Polynkin, A.; Bai, L.; Pittman, J.F.T.; Sienz, J.; Mulvaney-Johnson, Leigh; Brown, Elaine C.; Dawson, A.; Coates, Philip D.; Brookshaw, B.; Vinning, K.; Butler, J.
Caring for persons with Parkinson's disease in care homes: Perceptions of residents and their close relatives, and an associated review of residents' care plans. 2009 Armitage, Gerry R.; Adams, Jenny E.; Newell, Robert J.; Coates, David; Ziegler, Lucy; Hodgson, Ian J.
The modelling of large deformations of pre-oriented polyethylene 2002 Sweeney, John; Caton-Rose, Philip D.; Coates, Philip D.
In-process monitoring of micromoulding - assessment of process variation. 2005 Whiteside, Benjamin R.; Coates, Philip D.; Martyn, Michael T.
Shear and extensional rheology of hydroxypropyl cellulose melt using capillary rheometry 2009 Paradkar, Anant R.; Kelly, Adrian L.; Coates, Philip D.; York, Peter
Tensile Deformation of Oriented Poly(ε-caprolactone) and Its Miscible Blends with Poly(vinyl methyl ether) 2013 Jiang, Z.; Wang, Y.; Fu, L.; Whiteside, Benjamin R.; Wyborn, John; Norris, Keith; Wu, Z.; Coates, Philip D.; Men, Y.
Imaging and analysis of wave type interfacial instability in the coextrusion of low-density polyethylene melts 2009 Martyn, Michael T.; Spares, Robert; Coates, Philip D.; Zatloukal, M.
Employing a novel bioelastomer to toughen polylactide 2013 Kang, H.; Qiao, B.; Wang, R.; Wang, Z.; Zhang, L.; Ma, J.; Coates, Philip D.
Cocrystalization and simultaneous agglomeration using hot melt extrusion 2010 Dhumal, Ravindra S.; Kelly, Adrian L.; York, Peter; Coates, Philip D.; Paradkar, Anant R.
Developing a mobile learning solution for health and social care practice 2010 Taylor, J.D.; Dearnley, Christine A.; Laxton, J.C.; Coates, C.A.; Treasure-Jones, T.; Campbell, R.; Hall, I.
Using Mobile Technologies for Assessment and Learning in Practice Settings: Outcomes of Five Case Studies 2009 Dearnley, Christine A.; Taylor, J.D.; Hennessay, S.; Parks, M.; Coates, C.A.; Haigh, Jacquelyn; Fairhall, John R.; Riley, K.; Dransfield, M.
Service users and carers: preparing to be involved in work-based practice assessment 2011 Dearnley, Christine A.; Coulby, C.; Rhodes, C.; Taylor, J.D.; Coates, C.A.
Tough bio-based elastomer nanocomposites with high performance for engineering applications 2012 Wei, T.; Lei, L.; Kang, H.; Qiao, B.; Wang, Z.; Zhang, L.; Coates, Philip D.; Hua, K-C.; Kulig, J.
Dysregulation of autophagy in chronic lymphocytic leukemia with the small-molecule Sirtuin inhibitor Tenovin-6 2013 MacCallum, S.; Groves, M.J.; James, J.; Murray, K.; Appleyard, V.; Prescott, A.R.; Drbal, Abed Alnaser A.A.; Nicolaou, Anna; Cunningham, J.; Haydock, S.; Ganley, I.G.; Westwood, N.J.; Coates, P.J.; Lain, S.; Tauro, S.
Structure and blood compatibility of highly oriented poly(lactic acid)/thermoplastic polyurethane blends produced by solid hot stretching 2013 Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D.
Fibrillation of chain branched poly (lactic acid) with improved blood compatibility and bionic structure 2015 Li, Z.; Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D.; Martyn, Michael T.
High orientation of long chain branched poly (lactic acid) with enhanced blood compatibility and bionic structure 2016 Li, Z.; Ye, L.; Zhao, X.; Coates, Philip D.; Caton-Rose, Philip D.; Martyn, Michael T.
Structure and blood compatibility of highly oriented PLA/MWNTs composites produced by solid hot drawing 2014 Li, Z.; Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D.; Martyn, Michael T.
Structure and blood compatibility of highly oriented poly(l-lactic acid) chain extended by ethylene glycol diglycidyl ether 2015 Li, Z.; Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D.; Martyn, Michael T.
Flow-induced crystallization of long chain aliphatic polyamides under a complex flow field: Inverted anisotropic structure and formation mechanism 2015 Gao, Y.; Dong, X.; Wang, L.; Liu, G.; Liu, X.; Tuinea-Bobe, Cristina-Luminita; Whiteside, Benjamin R.; Coates, Philip D.; Wang, D.; Han, C.C.
Micro-contact reconstruction of adjacent carbon nanotubes in polymer matrix through annealing-Induced relaxation of interfacial residual stress and strain 2015 Li, Dongxu; Fei, G.; Xia, H.; Spencer, Paul E.; Coates, Philip D.
Highly toughened polylactide with novel sliding graft copolymer by in situ reactive compatibilization, crosslinking and chain extension 2014 Li, X.; Kang, H.; Shen, J.; Zhang, L.; Nishi, T.; Ito, K.; Zhao, C.; Coates, Philip D.
Effect of Ultrasound on Molecular Structure Development of Polylactide 2014 Bao, W.; Wu, H.; Guo, S.; Paradkar, Anant R.; Kelly, Adrian L.; Brown, Elaine C.; Coates, Philip D.
Drug loaded homogeneous electrospun PCL/gelatin hybrid nanofiber structures for anti-infective tissue regeneration membranes 2014 Xue, J.; He, M.; Liu, H.; Niu, Y.; Crawford, A.; Coates, Philip D.; Chen, D.; Shi, R.; Zhang, L.
Infrared Melt Temperature Measurement of Single Screw Extrusion 2015 Vera-Sorroche, Javier; Kelly, Adrian L.; Brown, Elaine C.; Coates, Philip D.
Near Infrared Investigation of Polypropylene-Clay Nanocomposites for Further Quality Control Purposes-Opportunities and Limitations 2015 Witschnigg, A.; Laske, S.; Holzer, C.; Patel, Rajnikant; Khan, Atif H.; Benkreira, Hadj; Coates, Philip D.
Investigation of the process energy demand in polymer extrusion: A brief review and an experimental study 2014 Abeykoon, Chamil; Kelly, Adrian L.; Brown, Elaine C.; Vera-Sorroche, Javier; Coates, Philip D.; Harkin-Jones, E.; Howell, Ken B.; Deng, J.; Li, K.; Price, M.
Process efficiency in polymer extrusion: Correlation between the energy demand and melt thermal stability 2014 Abeykoon, Chamil; Kelly, Adrian L.; Vera-Sorroche, Javier; Brown, Elaine C.; Coates, Philip D.; Deng, J.; Li, K.; Harkin-Jones, E.; Price, M.
The effect of materials, process settings and screw geometry on energy consumption and melt temperature in single screw extrusion 2016 Applied Energy 180 Abeykoon, Chamil; Kelly, Adrian L.; Brown, Elaine C.; Coates, Philip D. https://doi.org/10.1016/j.apenergy.2016.07.014
Shear-induced crystallization morphology and mechanical property of high density polyethylene in micro-injection molding 2013 Lin, X.; Caton-Rose, Philip D.; Ren, D.Y.; Wang, K.S.; Coates, Philip D.
Process structuring of polymers by solid phase orientation processing 2013 Coates, Philip D.; Caton-Rose, Philip D.; Ward, Ian M.; Thompson, Glen P.
Pressure Variation during Interfacial Instability in the Coextrusion of Low Density Polyethylene Melts 2013 Martyn, Michael T.; Coates, Philip D.
Electro-activated surface micropattern tuning for microinjection molded electrically conductive shape memory polyurethane composites 2013 Fei, G.; Tuinea-Bobe, Cristina-Luminita; Li, Dongxu; Li, G.; Whiteside, Benjamin R.; Coates, Philip D.; Xia, H.
Thermal optimisation of polymer extrusion using in-process monitoring techniques 2013 Vera-Sorroche, Javier; Kelly, Adrian L.; Brown, Elaine C.; Coates, Philip D.; Karnachi, N.; Harkin-Jones, E.; Li, K.; Deng, J.
Nano-scale temperature dependent visco-elastic properties of polyethylene terephthalate (PET) using atomic force microscope (AFM) 2013 Grant, Colin A.; Al-Fouzan, Abdulrahman M.; Gough, Timothy D.; Twigg, Peter C.; Coates, Philip D.
Examining the use of telehealth in community nursing: identifying the factors affecting frontline staff acceptance and telehealth adoption 2015 Taylor, J.; Coates, E.; Brewster, L.; Mountain, Gail; Wessels, B.; Hawley, M.S.
The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE 2014 Vera-Sorroche, Javier; Kelly, Adrian L.; Brown, Elaine C.; Gough, Timothy D.; Abeykoon, Chamil; Coates, Philip D.; Deng, J.; Li, K.; Harkin-Jones, E.; Price, M.
Fabrication and evaluation of electrospun PCL-gelatin micro-/nanofiber membranes for anti-infective GTR implants 2014 Xue, J.; He, M.; Liang, Y.; Crawford, A.; Coates, Philip D.; Chen, D.; Shi, R.; Zhang, L.
Preparation and in vivo efficient anti-infection property of GTR/GBR implant made by metronidazole loaded electrospun polycaprolactone nanofiber membrane 2014 Xue, J.; He, M.; Niu, Y.; Liu, H.; Crawford, A.; Coates, Philip D.; Chen, D.; Shi, R.; Zhang, L.
Low-cost process monitoring for polymer extrusion 2014 Deng, J.; Li, K.; Harkin-Jones, E.; Price, M.; Fei, M.R.; Kelly, Adrian L.; Vera-Sorroche, Javier; Coates, Philip D.; Brown, Elaine C.
Energy monitoring and quality control of a single screw extruder 2014 Deng, J.; Li, K.; Harkin-Jones, E.; Price, M.; Karnachi, N.; Kelly, Adrian L.; Vera-Sorroche, Javier; Coates, Philip D.; Brown, Elaine C.; Fei, M.R.
Investigation of the Temperature Homogeneity of Die Melt Flows in Polymer Extrusion 2014 Abeykoon, Chamil; Martin, P.J.; Kelly, Adrian L.; Li, K.; Brown, Elaine C.; Coates, Philip D.
Melt temperature consistency during polymer extrusion 2014 Abeykoon, Chamil; Martin, P.J.; Kelly, Adrian L.; Li, K.; Brown, Elaine C.; Coates, Philip D.
Capillary Study on Geometrical Dependence of Shear Viscosity of Polymer Melts 2014 Lin, X.; Kelly, Adrian L.; Woodhead, Michael; Ren, D.Y.; Wang, K.S.; Coates, Philip D.
Influence of coextrusion die channel height on interfacial instability of low density polyethylene melt flow 2014 Martyn, Michael T.; Coates, Philip D.; Zatloukal, M.
Mechanism of hydrogen-bonded complex formation between ibuprofen and nanocrystalline hydroxyapatite 2017 Ryabenkova, Yulia; Jadav, Niten B.; Conte, M.; Hippler, M.F.A.; Reeves-McLaren, N.; Coates, Philip D.; Twigg, Peter C.; Paradkar, Anant R.
Implementing solutions to improve and expand telehealth adoption: participatory action research in four community healthcare settings 2015 Taylor, J.; Coates, E.; Wessels, B.; Mountain, Gail; Hawley, M.S.
Application of activated barrier hopping theory to viscoplastic modeling of glassy polymers 2018 Mechanics of Time-Dependent Materials 22 145 - 165 Sweeney, John; Spencer, Paul E.; Vgenopoulos, Dimitrios; Babenko, Maksims; Boutenel, F.; Caton-Rose, Philip D.; Coates, Philip D.
Continuous Manufacturing of Cocrystals Using Solid State Shear Milling Technology 2018 Korde, Sachin A.; Pagire, Sudhir K.; Pan, H.; Seaton, Colin C.; Kelly, Adrian L.; Chen, Y.; Wang, Q.; Coates, Philip D.; Paradkar, Anant R.
A method for implementing time-integral constitutive equations in commercial CFD packages 1999 Journal of Non-Newtonian Fluid Mechanics 86 337 - 357 Olley P.;Spares R.;Coates P. 0377-0257 10.1016/S0377-0257(98)00192-X
Nanoindentation analysis of oriented polypropylene: Influence of elastic properties in tension and compression 2018 Polymer 151 197 - 207 Vgenopoulos, D.; Sweeney, John; Grant, Colin A.; Thompson, Glen P.; Spencer, Paul E.; Caton-Rose, Philip D.; Coates, Philip D.
Influence of the morphological structure of carbon nanotubes on the viscoelasticity of PMMA-based nanocomposites 2018 Journal of Applied Polymer Science 135 Lin X.;Li K.;Gough T.;Coates P.;Wang D.;Zhang L. 0021-8995 10.1002/app.46444
Spotlight on polymers 2010 Materials World 18 24 - 25 Coates P. 0967-8638
Application of a large deformation model to unstable tensile stretching of polyethylene 2002 International Journal of Plasticity 18 399 - 414 Sweeney J.;Collins T.;Coates P.;Unwin A.;Duckett R.;Ward I. 0749-6419 10.1016/S0749-6419(00)00104-2
Rheological characterisation of hydroxyapatite filled polyethylene composites: Part 2 - Isothermal compressibility and wall slip 2001 Plastics, Rubber and Composites Processing and Applications 30 205 - 212 Joseph R.;Martyn M.;Tanner K.;Coates P.;Bonfield W. 0959-8111
Effect of maleic anhydride grafted polypropylene compatibilizer on the morphology and properties of polypropylene/multiwalled carbon nanotube composite 2012 Polymer Composites 33 1376 - 1386 Ezat G.;Kelly A.;Mitchell S.;Youseffi M.;Coates P. 0272-8397 10.1002/pc.22264
Melt temperature field measurement: Influence of extruder screw and die geometry 2005 Plastics, Rubber and Composites 34 410 - 416 Kelly A.;Brown E.;Coates P. 1465-8011 10.1179/174328905X72003
Micromoulding: Extreme process monitoring and inline product assessment 2005 Plastics, Rubber and Composites 34 380 - 386 Whiteside B.;Spares R.;Howell K.;Martyn M.;Coates P. 1465-8011 10.1179/174328905X72011
Modelling the large strain solid phase deformation behaviour of polymer nanoclay composites 2008 Mechanics of Time-Dependent Materials 12 313 - 327 Spencer P.;Spares R.;Sweeney J.;Coates P. 1385-2000 10.1007/s11043-008-9064-7
Antibiotic-resistant acne: Lessons from Europe 2003 British Journal of Dermatology 148 467 - 478 Ross J.;Snelling A.;Carnegie E.;Coates P.;Cunliffe W.;Bettoli V.;Tosti G.;Katsambas A.;Galvan Peréz Del Pulgar J.;Rollman O.;Török L.;Eady E.;Cove J. 0007-0963 10.1046/j.1365-2133.2003.05067.x
Structure and biocompatibility improvement mechanism of highly oriented poly(lactic acid) produced by solid die drawing 2017 European Polymer Journal 97 68 - 76 Li J.;Li Z.;Ye L.;Zhao X.;Coates P.;Caton-Rose F. 0014-3057 10.1016/j.eurpolymj.2017.09.038
Crystallization Temperature Dependence of Cavitation and Plastic Flow in the Tensile Deformation of Poly(ε-caprolactone) 2017 Journal of Physical Chemistry B 121 6673 - 6684 Jiang Z.;Chen R.;Lu Y.;Whiteside B.;Coates P.;Wu Z.;Men Y. 1520-6106 10.1021/acs.jpcb.7b02595
Flow visualisation of polymer melts in abrupt contraction extrusion dies: Quantification of melt recirculation and flow patterns 2000 Journal of Non-Newtonian Fluid Mechanics 91 109 - 122 Martyn M.;Nakason C.;Coates P. 0377-0257 10.1016/S0377-0257(99)00107-X
Ultrasonic monitoring of nozzle and cavity during injection moulding 2002 Journal of Reinforced Plastics and Composites 21 441 - 450 Brown E.;Dawson A.;Coates P. 0731-6844 10.1177/0731684402021005444
Study of the dispersion of nanoclays in a LDPE matrix using microscopy and in-process ultrasonic monitoring 2009 Polymer Testing 28 277 - 287 Villanueva M.;Cabedo L.;Giménez E.;Lagarón J.;Coates P.;Kelly A. 0142-9418 10.1016/j.polymertesting.2008.12.009
Determination of filler concentration in magnesium hydroxide filled LDPE during extrusion, using ultrasound 2003 Plastics, Rubber and Composites 32 248 - 256 Smith G.;Brown E.;Barnwell D.;Martin K.;Coates P. 1465-8011 10.1179/146580103225002623
In-process rheometry studies of LDPE compounds: Part I: Unfilled resin 2000 International Polymer Processing 15 355 - 360 Kelly A.;Woodhead M.;Coates P.;Barnwell D.;Martin K. 0930-777X 10.3139/217.1612
Finite element simulation of geogrid manufacture using large deformation elastic formulation 2000 Plastics, Rubber and Composites Processing and Applications 29 51 - 58 Caton-Rose P.;Sweeney J.;Collins T.;Coates P. 0959-8111
Modeling the tensile behavior of ultra-high-molecular-weight polyethylene with a novel flow rule 2011 Journal of Applied Polymer Science 121 2936 - 2944 Sweeney J.;Naz S.;Coates P. 0021-8995 10.1002/app.33844
Development of continuous die drawing production process for engineered polymer cores for wire ropes 2000 Plastics, Rubber and Composites Processing and Applications 29 46 - 50 Taraiya A.;Nugent M.;Sweeney J.;Coates P.;Ward I. 0959-8111
Improved dielectric performance of polypropylene/multiwalled carbon nanotube nanocomposites by solid-phase orientation 2016 Lin, X.; Tian, J.-W.; Hu, P.-H.; Ambardekar, Rohan; Thompson, Glen P.; Dang, Z.-M.; Coates, Philip D.
In-process measurements of full field stress birefringence and velocities in polymer melt flows 2005 Plastics, Rubber and Composites 34 393 - 402 Gough T.;Spares R.;Coates P. 1465-8011 10.1179/174328905X72002
Effects of wide-range γ-irradiation doses on the structures and properties of 4,4-dicyclohexyl methane diisocyanate based poly(carbonate urethane)s 2014 Journal of Applied Polymer Science 131 Zhang C.;Jiang X.;Zhao Z.;Mao L.;Zhang L.;Coates P. 0021-8995 10.1002/app.41049
Process monitoring of polymer melts using in-line spectroscopy 2007 Transactions of the Institute of Measurement and Control 29 453 - 465 Barnes S.;Sibley M.;Edwards H.;Coates P. 0142-3312 10.1177/0142331207084336
Structure and Property of Microinjection Molded Poly(lactic acid) with High Degree of Long Chain Branching 2018 Zhao, Z.-G.; Yang, Q.; Coates, Philip D.; Whiteside, Benjamin R.; Kelly, Adrian L.; Huang, Y.-J.; Wu, P.-P.
Viscoplastic constitutive modeling of polymers - Flow rules and the plane strain response 2009 Journal of Applied Polymer Science 111 1190 - 1198 Sweeney J.;Naz S.;Coates P. 0021-8995 10.1002/app.29080
Geometrical dependence of viscosity of polymethylmethacrylate melt in capillary flow 2013 Journal of Applied Polymer Science 130 3384 - 3394 Lin X.;Kelly A.;Ren D.;Woodhead M.;Coates P.;Wang K. 0021-8995 10.1002/app.39591
Mammalian prohibitin proteins respond to mitochondrial stress and decrease during cellular senescence 2001 Experimental Cell Research 265 262 - 273 Coates P.;Nenutil R.;McGregor A.;Picksley S.;Crouch D.;Hall P.;Wright E. 0014-4827 10.1006/excr.2001.5166
In-process rheometry studies of LDPE compounds: Part II: Magnesium hydroxide filled 2000 International Polymer Processing 15 361 - 368 Kelly A.;Woodhead M.;Coates P.;Barnwell D.;Martin K. 0930-777X 10.3139/217.1613
Identifying common competences in health and social care: An example of multi-institutional and inter-professional working 2010 Nurse Education Today 30 264 - 270 Holt J.;Coates C.;Cotterill D.;Eastburn S.;Laxton J.;Mistry H.;Young C. 0260-6917 10.1016/j.nedt.2009.09.006
Modelling of viscoelastic coextrusion flows in multi-manifold flat dies 2004 Plastics, Rubber and Composites 33 305 - 309 Zatloukal M.;Martyn M.;Coates P.;Vlček J. 1465-8011 10.1179/174328904X20000
The effect of copper alloy mold tooling on the performance of the injection molding process 2011 Polymer Engineering and Science 51 1837 - 1847 Kelly A.;Mulvaney-Johnson L.;Beechey R.;Coates P. 0032-3888 10.1002/pen.21975
Use of ultrasound to determine variation of carbon dispersion in carbon black filled HDPE melts 2003 Plastics, Rubber and Composites 32 167 - 172 Smith G.;Brown E.;Barnwell D.;Martin K.;Coates P. 1465-8011 10.1179/146580103225002759
Enhanced dielectric properties of immiscible poly (vinylidene fluoride)/low density polyethylene blends by inducing multilayered and orientated structures 2017 Lin, X.; Fan, L.; Ren, D.; Jiao, Z.; Yang, W.; Coates, Philip D.
Glass fibre orientation within injection moulded automotive pedal Simulation and experimental studies 2000 Plastics, Rubber and Composites Processing and Applications 29 38 - 45 Whiteside B.;Coates P.;Hine P.;Duckett R. 0959-8111
Quantitative characterization of clay dispersion in polymer-clay nanocomposites 2011 Macromolecular Symposia 301 151 - 156 Xie S.;Harkin-Jones E.;Shen Y.;Hill J.;Hornsby P.;McAfee M.;McNally T.;Patel R.;Benkreira H.;Coates P. 1022-1360 10.1002/masy.201150319
Gas assisted injection moulding Finite element modelling and experimental validation 2000 Plastics, Rubber and Composites Processing and Applications 29 31 - 37 Johnson L.;Olley P.;Coates P. 0959-8111
Non-isothermal experimental and simulation study of residual wall thickness in gas assisted injection moulding 2006 Plastics, Rubber and Composites 35 47 - 58 Olley P.;Mulvaney-Johnson L.;Coates P. 1465-8011 10.1179/174328906X79969
Infrared sensor melt temperature measurement technology and benefits for thermoplastic injection molding process control 1999 Journal of Injection Molding Technology 3 159 - 180 Speight R.;Rose R.;Coates P. 1553-905X
Unified model of necking and shear banding in amorphous and semicrystalline polymers 2007 Journal of Applied Polymer Science 106 1095 - 1105 Sweeney J.;Caton-Rose P.;Spares R.;Coates P. 0021-8995 10.1002/app.26546
In Situ Cross-Linking of Poly(vinyl alcohol)/Graphene Oxide-Polyethylene Glycol Nanocomposite Hydrogels as Artificial Cartilage Replacement: Intercalation Structure, Unconfined Compressive Behavior, and Biotribological Behaviors 2018 Journal of Physical Chemistry C 122 3157 - 3167 Meng Y.;Ye L.;Coates P.;Twigg P. 1932-7447 10.1021/acs.jpcc.7b12465
A. tumefaciens-mediated transient expression as a tool for antigen production for cucurbit yellow stunting disorder virus 2010 Journal of Virological Methods 163 222 - 228 Steel E.;Barker I.;Danks C.;Coates D.;Boonham N. 0166-0934 10.1016/j.jviromet.2009.09.024
Theoretical and experimental investigation of interfacial instability phenomena occurring during viscoelastic coextrusion 2005 Plastics, Rubber and Composites 34 403 - 409 Zatloukal M.;Kopytko W.;Saha P.;Martyn M.;Coates P. 1465-8011 10.1179/174328905X71995
Comparison of injection molding machine performance 2005 Polymer Engineering and Science 45 857 - 865 Kelly A.;Woodhead M.;Coates P. 0032-3888 10.1002/pen.20335
Fibre orientation: Measurement, modelling and knowledge based design 2005 Plastics, Rubber and Composites 34 417 - 424 Hine P.;Duckett R.;Caton-Rose P.;Coates P.;Jittman P.;Chapman C.;Smith G. 1465-8011 10.1179/174328905X71986
Structure and biocompatibility of highly oriented poly(lactic acid) film produced by biaxial solid hot stretching 2017 Journal of Industrial and Engineering Chemistry 52 338 - 348 Li Z.;Ye L.;Zhao X.;Coates P.;Caton-Rose F.;Martyn M. 1226-086X 10.1016/j.jiec.2017.04.008
High shear strain rate rheometry of polymer melts 2009 Journal of Applied Polymer Science 114 864 - 873 Kelly A.;Gough A.;Whiteside B.;Coates P. 0021-8995 10.1002/app.30552
Ultrasonic measurement of residual wall thickness during gas assisted injection molding 2007 Polymer Engineering and Science 47 1730 - 1739 Brown E.;Mulvaney-Johnson L.;Coates P. 0032-3888 10.1002/pen.20832
Stress measurements for contraction flows of viscoelastic polymer melts 2000 Journal of Non-Newtonian Fluid Mechanics 91 123 - 142 Martyn M.;Nakason C.;Coates P. 0377-0257 10.1016/S0377-0257(99)00108-1
Influence of maleic anhydride compatibiliser on properties of polpropylene/multiwalled carbon nanotube composites 2011 Plastics, Rubber and Composites 40 438 - 448 Ezat G.;Kelly A.;Mitchell S.;Youseffi M.;Coates P. 1465-8011 10.1179/1743289810Y.0000000043
Structure evolution and orientation mechanism of long-chain-branched poly (lactic acid) in the process of solid die drawing 2017 Li, J.; Li, Z.; Ye, L.; Zhao, X.; Coates, Philip D.; Caton-Rose, Philip D.
In line melt temperature measurement during real time ultrasound monitoring of single screw extrusion 2000 Plastics, Rubber and Composites Processing and Applications 29 3 - 13 Brown E.;Olley P.;Coates P. 0959-8111
In process monitoring of polymer batch to batch variation in injection moulding 2000 Plastics, Rubber and Composites Processing and Applications 29 23 - 30 Kelly A.;Woodhead M.;Rose R.;Coates P. 0959-8111
Reactive grafting of glycidyl methacrylate onto polypropylene 2010 Journal of Applied Polymer Science 117 2707 - 2714 Burton E.;Woodhead M.;Coates P.;Gough T. 0021-8995 10.1002/app.31085
In process measurement of apparent extensional viscosity of low density polyethylene melts using flow visualisation 2000 Plastics, Rubber and Composites Processing and Applications 29 14 - 22 Martyn M.;Groves D.;Coates P. 0959-8111
The modelling of large deformations of pre-oriented polyethylene 2002 Polymer 43 899 - 907 Sweeney J.;Caton-Rose P.;Coates P.D. 0032-3861 10.1016/S0032-3861(01)00624-3
Ultrasound: A virtual instrument approach for monitoring of polymer melt variables 1999 Journal of Reinforced Plastics and Composites 18 331 - 338 Brown E.;Collins T.;Dawson A.;Olley P.;Coates P. 0731-6844 10.1177/073168449901800403
Vibrational spectroscopic and ultrasound analysis for the in-process monitoring of poly(ethylene vinyl acetate) copolymer composition during melt extrusion 2005 The Analyst 130 286 - 292 Barnes S.;Brown E.;Sibley M.;Edwards H.;Coates P. 0003-2654 10.1039/b416244g
Raman spectroscopic studies of the cure of dicyclopentadiene (DCPD) 2005 Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy 61 2946 - 2952 Barnes S.;Brown E.;Corrigan N.;Coates P.;Harkin-Jones E.;Edwards H. 1386-1425 10.1016/j.saa.2004.11.005
Real-time process monitoring of micromoulding using integrated ultrasonic sensors 2007 Transactions of the Institute of Measurement and Control 29 383 - 401 Ono Y.;Whiteside B.;Brown E.;Kobayashi M.;Cheng C.;Jen C.;Coates P. 0142-3312 10.1177/0142331207080153
Micromoulding: Process characteristics and product properties 2003 Plastics, Rubber and Composites 32 231 - 239 Whiteside B.;Martyn M.;Coates P.;Allan P.;Hornsby P.;Greenway G. 1465-8011 10.1179/146580103225002650
Effect of hydroxyapatite morphology/surface area on the rheology and processability of hydroxyapatite filled polyethylene composites 2002 Biomaterials 23 4295 - 4302 Joseph R.;McGregor W.;Martyn M.;Tanner K.;Coates P. 0142-9612 10.1016/S0142-9612(02)00192-8
Orientation direction dependency of cavitation in pre-oriented isotactic polypropylene at large strains 2018 Lu, Y.; Thompson, Glen P.; Lyu, D.; Caton-Rose, Philip D.; Coates, Philip D.; Men, Y.
High-Temperature Large Strain Viscoelastic Behavior of Polypropylene Modeled Using an Inhomogeneously Strained Network 1999 Journal of Applied Polymer Science 72 563 - 575 Sweeney J.;Collins T.;Coates P.;Duckett R. 0021-8995 10.1002/(SICI)1097-4628(19990425)72:4<563::AID-APP13>3.0.CO;2-#
Applications of process spectroscopy to polymer melt processing 2003 Spectroscopy Europe 15 Barnes S.;Sibley M.;Edwards H.;Coates P.;Andrews J.;Dallin P. 0966-0941
Quantitative characterization of clay dispersion in polypropylene-clay nanocomposites by combined transmission electron microscopy and optical microscopy 2010 Materials Letters 64 185 - 188 Xie S.;Harkin-Jones E.;Shen Y.;Hornsby P.;McAfee M.;McNally T.;Patel R.;Benkreira H.;Coates P. 0167-577X 10.1016/j.matlet.2009.10.042
Analysis of the essential work of fracture method as applied to UHMWPE 2010 Journal of Materials Science 45 448 - 459 Naz S.;Sweeney J.;Coates P. 0022-2461 10.1007/s10853-009-3961-2
Fabrication of drug-loaded anti-infective guided tissue regeneration membrane with adjustable biodegradation property 2015 Colloids and Surfaces B: Biointerfaces 135 846 - 854 Xue J.;Shi R.;Niu Y.;Gong M.;Coates P.;Crawford A.;Chen D.;Tian W.;Zhang L. 0927-7765 10.1016/j.colsurfb.2015.03.031
Modeling the large-strain constitutive behavior of polycarbonate under isothermal and anisothermal conditions 2005 Journal of Applied Polymer Science 96 2105 - 2116 Sweeney J.;Caton-Rose P.;Coates P. 0021-8995 10.1002/app.21681
Vibrational spectroscopic and ultrasound analysis for in-process characterization of high-density polyethylene/polypropylene blends during melt extrusion 2005 Applied Spectroscopy 59 611 - 619 Barnes S.;Brown E.;Sibley M.;Edwards H.;Scowen I.;Coates P. 0003-7028 10.1366/0003702053946001
Recycling of uPVC window profile waste 2005 Journal of Vinyl and Additive Technology 11 119 - 126 Kelly A.;Rose R.;Spares R.;Coates P.;Weston S. 1083-5601 10.1002/vnl.20047
Interfacial stick-slip transition in hydroxyapatite filled high density polyethylene composite 2006 Bulletin of Materials Science 29 85 - 89 Joseph R.;Martyn M.;Tanner K.;Coates P. 0250-4707
Measurement of apparent extensional viscosities of polyolefin melts from process contraction flows 2000 Journal of Non-Newtonian Fluid Mechanics 92 203 - 226 Martyn M.;Nakason C.;Coates P. 0377-0257 10.1016/S0377-0257(99)00109-3
Simulation of the gas-assisted injection moulding process using a viscoelastic extension to the Cross-WLF viscosity model 2011 Journal of Engineering Manufacture: Imeche (B) 225 P. Olley, L. Mulvaney-Johnson, P.D. Coates IMechE DOI: 10.1177/095440891409134
Microinjection moulded polyetheretherketone biomaterials as spinal implants: physico-chemical and mechanical characterisation 2019 Materials Research Express 6 Tuinea-Bobe, Cristina-Luminita; Xia, H.; Ryabenkova, Yulia; Sweeney, John; Coates, Philip D.; Fei, G.
Aligned electrospun cellulose scaffolds coated with rhBMP-2 for both in vitro and in vivo bone tissue engineering. 2019 Carbohydrate Polymers 213 Zhang X;Wang C;Liao M;Dai L;Tang Y;Zhang H;Coates P;Sefat F;Zheng L;Song J;Zheng Z;Zhao D;Yang M;Zhang W;Ji P; 1879-1344 10.1016/j.carbpol.2019.02.038
Effect of screw configuration on the dispersion and properties of polypropylene/multiwalled carbon nanotube composite 2019 Ezat, G.S.; Kelly, Adrian L.; Youseffi, Mansour; Coates, Philip D.
Measuring the development of fibre orientation during the melt extrusion of short glass fibre reinforced polypropylene 1997 Composites Part A: Applied Science and Manufacturing 28 949 - 958 Hine P.;Tsui S.;Coates P.;Ward I.;Duckett R. 1359-835X 10.1016/S1359-835X(97)00070-5
Reactive extrusion of polymers 1995 Engineering plastics 8 406 - 409 Brown M.;Johnson A.;Coates P. 0952-6900
Towards intelligent process control of injection moulding of polymers 1995 Proceedings Of The Institution Of Mechanical Engineers Part B-Journal Of Engineering Manufacture 209 357 - 367 Coates P.;Speight R. 0954-4054
Structural reaction injection moulding of polyethylene fibre reinforced epoxy composites 1995 Plastics, Rubber and Composites Processing and Applications 24 277 - 283 Long S.;Hine P.;Coates P.;Johnson A.;Duckett R.;Ward I. 0959-8111
In-process measurements for monitoring and control of gelation levels in UPVC compounding 1995 Plastics, Rubber and Composites Processing and Applications 23 295 - 303 Coates P.;Rose R.;Wilkinson B. 0959-8111
An approximation to the KBKZ constitutive equation 1997 Journal of Non-Newtonian Fluid Mechanics 69 239 - 254 Olley P.;Coates P. 0377-0257 10.1016/S0377-0257(96)01539-X
In-line process monitoring for injection moulding control 1997 Proceedings Of The Institution Of Mechanical Engineers, Part E: Journal Of Process Mechanical 211 115 - 128 Speight R.;Coates P.;Hull J.;Peters C. 0954-4089 10.1243/0954408971529601
Application of an elastic model to the large deformation, high temperature stretching of polypropylene 1997 Polymer 38 5991 - 5999 Sweeney J.;Collins T.;Coates P.;Ward I. 0032-3861 10.1016/S0032-3861(97)00159-6
Aligned electrospun cellulose scaffolds coated with rhBMP-2 for both in vitro and in vivo bone tissue engineering 2019 Carbohydrate Polymers 213 Zhang, X.; Wang, C.; Liao, M.; Dai, L.; Tang, Y.; Zhang, H.; Coates, Philip D.; Sefat, Farshid; Zheng, L.; Song, J.; Zheng, Z.; Zhao, D.; Yang, M.; Zhang, W.; Ji, P.
A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication 2019 Additive Manufacturing Hebda, Michael; McIlroy, C.; Whiteside, Benjamin R.; Caton-Rose, Philip D.; Coates, Philip D.
Die geometry induced heterogeneous morphology of polypropylene inside the die during die-drawing process 2019 Lyu, D.; Sun, Y.; Thompson, Glen P.; Lu, Y.; Caton-Rose, Philip D.; Lai, Y.; Coates, Philip D.; Men, Y.
In Situ Cross-Linking of Poly(vinyl alcohol)/Graphene Oxide–Polyethylene Glycol Nanocomposite Hydrogels as Artificial Cartilage Replacement: Intercalation Structure, Unconfined Compressive Behavior, and Biotribological Behaviors 2018 Meng, Y.; Coates, Philip D.; Twigg, Peter C.
Influence of the morphological structure of carbon nanotubes on the viscoelasticity of PMMA‐based nanocomposites 2018 Lin, X.; Li, K.; Gough, Timothy D.; Coates, Philip D.; Wang, D.; Zhang, L.
Novel rhodium on carbon catalysts for the oxidation of benzyl alcohol to benzaldehyde: A study of the modification of metal/support interactions by acid pre-treatments 2019 Wilde, C.A.; Ryabenkova, Yulia; Firth, I.M.; Pratt, L.; Railton, J.; Bravo-Sanchez, M.; Sano, N.; Cumpson, P.J.; Coates, Philip D.; Liu, X.; Conte, M.
Multiple shape memory behavior of highly oriented long‐chain‐branched poly(lactic acid) and its recovery mechanism 2019 Li, J.; Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D.
Multiple shape memory behavior of highly oriented long-chain-branched poly(lactic acid) and its recovery mechanism 2019 Journal of Biomedical Materials Research - Part A 107 872 - 883 Li J.;Zhao X.;Ye L.;Coates P.;Caton-Rose F. 1549-3296 10.1002/jbm.a.36604
DRAWING THICK SECTION POLYPROPYLENE AT HIGH STRAIN RATES. 1987 Plastics and Rubber Processing and Applications 8 165 - 172 Coates P.;Ellis D.;Pourmahnaei S. 0144-6045
In-Line Rheological Measurements for Extrusion Process Control 1995 Measurement and Control 28 10 - 16 Coates P. 0020-2940 10.1177/002029409502800103
Free‐radically initiated polymerisations for reaction injection moulding (RIM): Some observations on polymer blends involving poly(methyl methacrylate) as one of the components 1987 Macromolecular Symposia 10-11 593 - 615 Armitage P.;Coates P.;Johnson A.;Hill S.;Hynds J.;Leadbitter J.;Myktiuk J. 0258-0322 10.1002/masy.19870100128
Die drawing: Solid phase drawing of polymers through a converging die 1981 Polymer Engineering and Science 21 612 - 618 Coates P.;Ward I. 0032-3888 10.1002/pen.760211007
RRIM: PROCESS MEASUREMENTS ON A COMPUTERIZED SMALL-SCALE MACHINE. 1983 Polymer Process Engineering 3 159 - 171 Coates P.;Sivakumar A.;Johnson A. 0735-7931
Off line and in process converging flow measurements for polyethylene melts 1997 Plastics, Rubber and Composites Processing and Applications 26 13 - 22 Groves D.;Martyn M.;Coates P. 0959-8111
Controlled in vitro degradation behavior of highly oriented long-chain-branched poly(lactic acid) produced by solid-phase die drawing 2019 Journal of Biomedical Materials Research - Part A Li R.;Li J.;Zhao X.;Ye L.;Coates P.;Caton-Rose F. 1549-3296 10.1002/jbm.a.36665
RRIM: RHEOLOGY OF GLASS-FILLED POLYOL SLURRIES AND POLYMERIC ISOCYANATE REAGENTS. 1987 Plastics and Rubber Processing and Applications 7 19 - 28 Coates P.;Sivakumar A.;Johnson A. 0144-6045
Investing in new technology for competitive advantage 1993 European Management Journal 11 367 - 376 Butler R.;Turner R.;Coates P.;Pike R.;Price D. 0263-2373 10.1016/0263-2373(93)90065-P
Novel reinforced reaction injection molding (RRIM) processing: Computer‐controlled multiple‐stream RRIM production of interpenetrating polymer networks and polyurethanes 1987 Polymer Engineering and Science 27 1209 - 1215 Coates P.;Johnson A.;Armitage P.;Hynds J.;Leadbitter J. 0032-3888 10.1002/pen.760271602
Reactive processing of polymers and composites 1993 Materials World 1 156 - 160 Coates P.;Johnson A. 0967-8638
PRIM: EXPERIMENTAL STUDIES OF FLOW TRANSIENTS IN MIXHEADS. 1987 Plastics and Rubber Processing and Applications 8 203 - 213 Coates P.;Sivakumar A.;Johnson A. 0144-6045
Influence of reaction injection moulding (RIM) processing variables on the mechanical properties of a commercial linear segmented polyamide 1995 Plastics, Rubber and Composites Processing and Applications 23 161 - 174 Long S.;Dawood I.;Coates P.;Johnson A. 0959-8111
Structural evolution of flow-oriented high density polyethylene upon heating: In situ SAXS and WAXD studies 2019 Polymer 180 Liao T.;Zhao X.;Yang X.;Coates P.;Whiteside B.;Jiang Z.;Men Y. 0032-3861 10.1016/j.polymer.2019.121698
Modelling the Mechanical and Strain Recovery Behaviour of Partially Crystalline PLA. 2019 Polymers 11 Sweeney J;Spencer P;Nair K;Coates P; 2073-4360 MDPI 10.3390/polym11081342
Molecular weight dependency of β phase formation in injection-molded isotactic polypropylene 2019 Journal of Applied Polymer Science Yang X.;Tuinea-Bobe C.;Whiteside B.;Coates P.;Lu Y.;Men Y. 0021-8995 10.1002/app.48555
Predicting the location of weld line in microinjection-molded polyethylene via molecular orientation distribution 2019 Journal of Polymer Science, Part B: Polymer Physics Liao T.;Zhao X.;Yang X.;Whiteside B.;Coates P.;Jiang Z.;Men Y. 0887-6266 10.1002/polb.24905
Compression-induced electrical percolation and enhanced mechanical properties of polydimethylsiloxane-based nanocomposites 2020 Journal of Materials Science Wu D.;Li Z.;Du Y.;Zhang L.;Huang Y.;Sun J.;Coates P.;Gao X. 0022-2461 10.1007/s10853-020-04780-7
Long-chain branched poly(lactic acid)- b-poly(lactide- co-caprolactone): Structure, viscoelastic behavior, and triple-shape memory effect as smart bone fixation material 2020 Industrial and Engineering Chemistry Research 59 4524 - 4532 Liu Y.;Cao H.;Ye L.;Coates P.;Caton-Rose F.;Zhao X. 0888-5885 10.1021/acs.iecr.9b06514
Suppressed Cavitation in Die-Drawn Isotactic Polypropylene 2020 Macromolecules Lyu D.;Sun Y.;Lu Y.;Liu L.;Chen R.;Thompson G.;Caton-Rose F.;Coates P.;Wang Y.;Men Y. 0024-9297 10.1021/acs.macromol.0c00005
Experimental analysis of the tensile property of FFF-printed elastomers 2020 Polymer Testing 90 Lin X.;Coates P.;Hebda M.;Wang R.;Lu Y.;Zhang L. 0142-9418 10.1016/j.polymertesting.2020.106687
An experimental and simulation comparison of a 3-D abrupt contraction flow using the Molecular Stress Function constitutive model 2020 Plastics, Rubber and Composites n/k P. Olley, T. Gough, R. Spares, P.D. Coates Maney Publishing
Advantage of Preserving Bi-orientation Structure of Isotactic Polypropylene through Die Drawing 2020 Chinese Journal of Polymer Science (English Edition) Lyu D.;Sun Y.Y.;Lai Y.Q.;Thompson G.;Caton-Rose P.;Coates P.;Lu Y.;Men Y.F. 0256-7679 10.1007/s10118-020-2465-z
Highly improved PP/CNTs sheet prepared by tailoring crystallization morphology through solid-phase die drawing and multilayer hot compression 2020 Polymer Crystallization 3 Lin X.;Spencer P.;Gong M.;Coates P. 2573-7619 10.1002/pcr2.10137
Enhancing Poly(lactic acid) Microcellular Foams by Formation of Distinctive Crystalline Structures 2020 Industrial and Engineering Chemistry Research 59 7624 - 7632 Li R.;Ye L.;Zhao X.;Coates P.;Caton-Rose F. 0888-5885 10.1021/acs.iecr.0c00537
Breakage of carbon nanotube agglomerates within polypropylene matrix by solid phase die drawing 2020 Journal of Applied Polymer Science Lin X.;Gong M.;Innes J.;Spencer P.;Coates P.;Korde S. 0021-8995 10.1002/app.49742
Continuous Manufacturing of Cocrystals Using Solid State Shear Milling Technology 2018 Crystal Growth and Design 18 2297 - 2304 Korde, S.; Pagire, S.; Pan, H.; Seaton, C.; Kelly, A.; Chen, Y.; Wang, Q.; Coates, P.; Paradkar, A. https://doi.org/10.1021/acs.cgd.7b01733
Fabrication and evaluation of electrospun PCL-gelatin micro-/nanofiber membranes for anti-infective GTR implants 2014 Journal of Materials Chemistry B Xue, J.;He, M.;Liang, Y.;Crawford, A.;Coates, P.;Chen, D.;Shi, R.;Zhang, L.; 10.1039/c4tb00737a
Highly toughened polylactide with novel sliding graft copolymer by in situ reactive compatibilization, crosslinking and chain extension 2014 Polymer (United Kingdom) Li, X.;Kang, H.;Shen, J.;Zhang, L.;Nishi, T.;Ito, K.;Zhao, C.;Coates, P.; 10.1016/j.polymer.2014.06.045
Influence of coextrusion die channel height on interfacial instability of low density polyethylene melt flow 2014 Plastics, Rubber and Composites Martyn, M.T.;Coates, P.D.;Zatloukal, M.; 10.1179/1743289813Y.0000000065
Low-cost process monitoring for polymer extrusion 2014 Transactions of the Institute of Measurement and Control Deng, J.;Li, K.;Harkin-Jones, E.;Price, M.;Fei, M.;Kelly, A.;Vera-Sorroche, J.;Coates, P.;Brown, E.; 10.1177/0142331213502696
Investigation of the temperature homogeneity of die melt flows in polymer extrusion 2014 Polymer Engineering and Science Abeykoon, C.;Martin, P.J.;Kelly, A.L.;Li, K.;Brown, E.C.;Coates, P.D.; 10.1002/pen.23784
Energy monitoring and quality control of a single screw extruder 2014 Applied Energy Deng, J.;Li, K.;Harkin-Jones, E.;Price, M.;Karnachi, N.;Kelly, A.;Vera-Sorroche, J.;Coates, P.;Brown, E.;Fei, M.; 10.1016/j.apenergy.2013.08.084
Structure and blood compatibility of highly oriented PLA/MWNTs composites produced by solid hot drawing 2014 Journal of Biomaterials Applications Li, Z.;Zhao, X.;Ye, L.;Coates, P.;Caton-Rose, F.;Martyn, M.; 10.1177/0885328213490047
The effect of melt viscosity on thermal efficiency for single screw extrusion of HDPE 2014 Chemical Engineering Research and Design Vera-Sorroche, J.;Kelly, A.L.;Brown, E.C.;Gough, T.;Abeykoon, C.;Coates, P.D.;Deng, J.;Li, K.;Harkin-Jones, E.;Price, M.; 10.1016/j.cherd.2013.12.025
Electro-activated surface micropattern tuning for microinjection molded electrically conductive shape memory polyurethane composites 2013 RSC Advances Fei, G.;Tuinea-Bobe, C.;Li, D.;Li, G.;Whiteside, B.;Coates, P.;Xia, H.; 10.1039/c3ra43640c
Geometrical dependence of viscosity of polymethylmethacrylate melt in capillary flow 2013 Journal of Applied Polymer Science Lin, X.;Kelly, A.;Ren, D.;Woodhead, M.;Coates, P.;Wang, K.; 10.1002/app.39591
Pressure variation during interfacial instability in the coextrusion of low density polyethylene melts 2013 International Polymer Processing Martyn, M.T.;Coates, P.D.; 10.3139/217.2786
Process structuring of polymers by solid phase orientation processing 2013 Science China Chemistry Coates, P.D.;Caton-Rose, P.;Ward, I.M.;Thompson, G.; 10.1007/s11426-013-4881-1
Employing a novel bioelastomer to toughen polylactide 2013 Polymer (United Kingdom) Kang, H.;Qiao, B.;Wang, R.;Wang, Z.;Zhang, L.;Ma, J.;Coates, P.; 10.1016/j.polymer.2013.02.053
Nano-scale temperature dependent visco-elastic properties of polyethylene terephthalate (PET) using atomic force microscope (AFM) 2013 Micron Grant, C.A.;Alfouzan, A.;Gough, T.;Twigg, P.C.;Coates, P.D.; 10.1016/j.micron.2012.06.004
Tensile deformation of oriented poly(ε-caprolactone) and its miscible blends with poly(vinyl methyl ether) 2013 Macromolecules Jiang, Z.;Wang, Y.;Fu, L.;Whiteside, B.;Wyborn, J.;Norris, K.;Wu, Z.;Coates, P.;Men, Y.; 10.1021/ma401052x
Structure and blood compatibility of highly oriented poly(lactic acid)/thermoplastic polyurethane blends produced by solid hot stretching 2013 Polymers for Advanced Technologies Zhao, X.;Ye, L.;Coates, P.;Caton-Rose, F.;Martyn, M.; 10.1002/pat.3156
Thermal optimisation of polymer extrusion using in-process monitoring techniques 2013 Applied Thermal Engineering Vera-Sorroche, J.;Kelly, A.;Brown, E.;Coates, P.;Karnachi, N.;Harkin-Jones, E.;Li, K.;Deng, J.; 10.1016/j.applthermaleng.2012.04.013
Shear-induced crystallization morphology and mechanical property of high density polyethylene in micro-injection molding 2013 Journal of Polymer Research Lin, X.;Caton-Rose, F.;Ren, D.;Wang, K.;Coates, P.; 10.1007/s10965-013-0122-8
Effect of maleic anhydride grafted polypropylene compatibilizer on the morphology and properties of polypropylene/multiwalled carbon nanotube composite 2012 Polymer Composites Ezat, G.S.;Kelly, A.L.;Mitchell, S.C.;Youseffi, M.;Coates, P.D.; 10.1002/pc.22264
Tough bio-based elastomer nanocomposites with high performance for engineering applications 2012 Advanced Engineering Materials Wei, T.;Lei, L.;Kang, H.;Qiao, B.;Wang, Z.;Zhang, L.;Coates, P.;Hua, K.-C.;Kulig, J.; 10.1002/adem.201100162
Influence of maleic anhydride compatibiliser on properties of polpropylene/multiwalled carbon nanotube composites 2011 Plastics, Rubber and Composites Ezat, G.;Kelly, A.;Mitchell, S.;Youseffi, M.;Coates, P.D.; 10.1179/1743289810Y.0000000043
Simulation of the gas-assisted injection moulding process using a viscoelastic extension to the Cross-WLF viscosity model 2011 Proceedings Of The Institution Of Mechanical Engineers, Part E: Journal Of Process Mechanical Engineering Olley, P.;Mulvaney-Johnson, L.;Coates, P.D.; 10.1177/0954408911409134
The effect of copper alloy mold tooling on the performance of the injection molding process 2011 Polymer Engineering and Science Kelly, A.L.;Mulvaney-Johnson, L.;Beechey, R.;Coates, P.D.; 10.1002/pen.21975
Cocrystalization and simultaneous agglomeration using hot melt extrusion 2010 Pharmaceutical Research Paradkar, A.;Dhumal, R.S.;Kelly, A.L.;York, P.;Coates, P.D.; 10.1007/s11095-010-0273-9
Processing of polyurethane/carbon nanotubes composites using novel minimixer 2010 Plastics, Rubber and Composites Zhan, Y.H.;Patel, R.;Lavorgna, M.;Piscitelli, F.;Khan, A.;Xia, H.S.;Benkreira, H.;Coates, P.; 10.1179/174328910X12777566997496
Small scale injection moulding of modified poly(vinyl alcohol) 2010 Plastics, Rubber and Composites Li, L.;Mulvaney-Johnson, L.;Chen, N.;Wang, Q.;Coates, P.D.; 10.1179/174328910X12777566997379
Spotlight on polymers 2010 Materials World Coates, P.;
High shear strain rate rheometry of polymer melts 2009 Journal of Applied Polymer Science Kelly, A.L.;Gough, A.T.;Whiteside, B.R.;Coates, P.D.; 10.1002/app.30552
Study of the dispersion of nanoclays in a LDPE matrix using microscopy and in-process ultrasonic monitoring 2009 Polymer Testing Villanueva, M.P.;Cabedo, L.;Giménez, E.;Lagarón, J.M.;Coates, P.D.;Kelly, A.L.; 10.1016/j.polymertesting.2008.12.009
Shear and extensional rheology of hydroxypropyl cellulose melt using capillary rheometry 2009 Journal of Pharmaceutical and Biomedical Analysis Paradkar, A.;Kelly, A.;Coates, P.;York, P.; 10.1016/j.jpba.2008.11.014
Imaging and analysis of wave type interfacial instability in the coextrusion of low-density polyethylene melts 2009 Journal of Non-Newtonian Fluid Mechanics Martyn, M.T.;Spares, R.;Coates, P.D.;Zatloukal, M.; 10.1016/j.jnnfm.2008.08.001
Water assisted injection moulding: Development of insights and predictive capabilities through experiments on instrumented process in parallel with computer simulations 2008 Plastics, Rubber and Composites Polynkin, A.;Bai, L.;Pittman, J.F.T.;Sienz, J.;Mulvaney-Johnson, L.;Brown, E.;Dawson, A.;Coates, P.;Brookshaw, B.;Vinning, K.;Butler, J.; 10.1179/174328908X283438
Performance enhancement of polymer nanocomposites via multiscale modelling of processing and properties 2008 Plastics, Rubber and Composites Harkin-Jones, E.;Figiel, L.;Spencer, P.;Abu-Zurayk, R.;Al-Shabib, W.;Chan, V.;Rajeev, R.;Soon, K.;Buckley, P.;Sweeney, J.;Menary, G.;Armstrong, C.;Assender, H.;Coates, P.;Dunne, F.;McNally, T.;Martin, P.; 10.1179/174328908X83410
Optical imaging metrology for micromoulding cavity flows and products 2008 Plastics, Rubber and Composites Whiteside, B.R.;Spares, R.;Brown, E.C.;Norris, K.;Coates, P.D.;Kobayashi, M.;Jen, C.-K.;Cheng, C.-C.; 10.1179/174328908X283384
Melt temperature field measurements in extrusion using thermocouple meshes 2008 Plastics, Rubber and Composites Kelly, A.L.;Brown, E.C.;Howell, K.;Coates, P.D.; 10.1179/174328908X283393
Three-dimensional characterisation of full field stress and velocity fields for polyethylene melt through abrupt contraction 2008 Plastics, Rubber and Composites Gough, T.;Spares, R.;Kelly, A.L.;Brook, S.M.;Coates, P.D.; 10.1179/174328908X283429
Plastics, rubber, and composites: Editorial 2008 Plastics, Rubber and Composites Coates, P.; 10.1179/174328908X283249
Real time diagnostics of gas/water assisted injection moulding using integrated ultrasonic sensors 2007 Plastics, Rubber and Composites Mulvaney-Johnson, L.;Cheng, C.C.;Ono, Y.;Brown, E.C.;Jen, C.K.;Coates, P.D.; 10.1179/174328907X177617
Real-time diagnosis of micro powder injection molding using integrated ultrasonic sensors 2007 International Polymer Processing Cheng, C.-C.;Ono, Y.;Whiteside, B.D.;Brown, E.C.;Jen, C.-K.;Coates, P.D.;
Plastics, Rubber and Composites: Editor's note 2007 Plastics, Rubber and Composites Coates, P.;
Editorial: Synthesis in macromolecular engineering 2006 Plastics, Rubber and Composites Coates, P.; 10.1179/174328906X149781
The effect of screw geometry on melt temperature profile in single screw extrusion 2006 Polymer Engineering and Science Kelly, A.L.;Brown, E.G.;Coates, P.D.; 10.1002/pen.20657
Measuring and predicting the dynamics of linear monodisperse entangled polymers in rapid flow through an abrupt contraction. A small angle neutron scattering study 2006 Macromolecules Graham, R.S.;Bent, J.;Hutchings, L.R.;Richards, R.W.;Groves, D.J.;Embery, J.;Nicholson, T.M.;McLeish, T.C.B.;Likhtman, A.E.;Harlen, O.G.;Read, D.J.;Gough, T.;Spares, R.;Coates, P.D.;Grillo, I.; 10.1021/ma052357z
Interfacial stick-slip transition in hydroxyapatite filled high density polyethylene composite 2006 Bulletin of Materials Science Joseph, R.;Martyn, M.T.;Tanner, K.E.;Coates, P.D.;
Plastics, Rubber and Composites: Editorial 2006 Plastics, Rubber and Composites Coates, P.; 10.1179/174328906X79941
In-process measurements of full field stress birefringence and velocities in polymer melt flows 2005 Plastics, Rubber and Composites Gough, T.;Spares, R.;Coates, P.D.; 10.1179/174328905X72002
In-process monitoring of micromoulding - Assessment of process variation 2005 International Polymer Processing Whiteside, B.R.;Martyn, M.T.;Coates, P.D.;
Comparison of injection molding machine performance 2005 Polymer Engineering and Science Kelly, A.L.;Woodhead, M.;Coates, P.D.; 10.1002/pen.20335
Real-time ultrasonic diagnosis of polymer degradation and filling incompleteness in micromoulding 2005 Plastics, Rubber and Composites Whiteside, B.R.;Brown, E.C.;Ono, Y.;Jen, C.-K.;Coates, P.D.; 10.1179/174328905X71977
Recycling of uPVC window profile waste 2005 Journal of Vinyl and Additive Technology Kelly, A.L.;Rose, R.M.;Spares, R.;Coates, P.D.;Weston, S.; 10.1002/vnl.20047
Polymer processing: Using synchrotron radiation to follow structure development in commercial and novel polymer materials 2005 Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms Heeley, E.L.;Gough, T.;Bras, W.;Gleeson, A.J.;Coates, P.D.;Ryan, A.J.; 10.1016/j.nimb.2005.06.012
Plastics, Rubber and Composites: Editorial 2005 Plastics, Rubber and Composites Coates, P.; 10.1179/174328905X55588
Development of reactive rotational moulding process 2004 Plastics, Rubber and Composites Corrigan, N.;Harkin-Jones, E.;Brown, E.;Coates, P.D.;Crawford, R.J.; 10.1179/146580104225018355
Melt temperature field measurement in single screw extrusion using thermocouple meshes 2004 Review of Scientific Instruments Brown, E.C.;Kelly, A.L.;Coates, P.D.; 10.1063/1.1808895
Micromoulding: Process measurements, product morphology and properties 2004 Plastics, Rubber and Composites Whiteside, B.R.;Martyn, M.T.;Coates, P.D.;Greenway, G.;Allen, P.;Hornsby, P.; 10.1179/146580104225018346
Fibre orientation structures and their effect on crack resistance of injection moulded transverse ribbed plate 2004 Plastics, Rubber and Composites Hine, P.J.;Duckett, R.A.;Caton-Rose, P.;Coates, P.D.; 10.1179/146580104225018292
Injection moulding process assessment by energy monitoring 2004 Plastics, Rubber and Composites Dawson, A.J.;Coates, P.D.;Collis, R.;Owen, L.;Owen, D.;Rajamani, H.S.; 10.1179/146580104225018337
Visualisation and analysis of interfacial instability in coextrusion of LDPE melt 2004 Plastics, Rubber and Composites Martyn, M.T.;Spares, R.;Coates, P.D.;Zatloukal, M.; 10.1179/146580104225018328
Determination of filler concentration in magnesium hydroxide filled LDPE during extrusion, using ultrasound 2003 Plastics, Rubber and Composites Smith, G.D.;Brown, E.C.;Barnwell, D.;Martin, K.;Coates, P.D.;
Applications of process spectroscopy to polymer melt processing 2003 Spectroscopy Europe Barnes, S.E.;Sibley, M.G.;Edwards, H.G.M.;Coates, P.D.;Andrews, J.;Dallin, P.;
Plastics, Rubber and Composites: Editorial 2004 Plastics, Rubber and Composites Coates, P.; 10.1179/146580104225018391
Plastics, Rubber and Composite: Editorial 2003 Plastics, Rubber and Composites Coates, P.;
Micromoulding: Process characteristics and product properties 2003 Plastics, Rubber and Composites Whiteside, B.R.;Martyn, M.T.;Coates, P.D.;Allan, P.S.;Hornsby, P.R.;Greenway, G.;
Neutron-mapping polymer flow: Scattering, flow visualization, and molecular theory 2003 Science Bent, J.;Hutchings, L.R.;Richards, R.W.;Gough, T.;Spares, R.;Coates, P.D.;Grillo, I.;Harlen, O.G.;Read, D.J.;Graham, R.S.;Likhtman, A.E.;Groves, D.J.;Nicholson, T.M.;McLeish, T.C.B.; 10.1126/science.1086952
In-process vibrational spectroscopy and ultrasound measurements in polymer melt extrusion 2003 Polymer Coates, P.D.;Barnes, S.E.;Sibley, M.G.;Brown, E.C.;Edwards, H.G.M.;Scowen, I.J.; 10.1016/S0032-3861(03)00544-5
Use of ultrasound to determine variation of carbon dispersion in carbon black filled HDPE melts 2003 Plastics, Rubber and Composites Smith, G.D.;Brown, E.C.;Barnwell, D.;Martin, K.;Coates, P.D.;
Suppression of necking in polyethylene 2002 Journal of Applied Polymer Science Unwin, A.P.;Duckett, R.A.;Ward, I.M.;Collins, T.L.D.;Sweeney, J.;Coates, P.D.; 10.1002/app.11337
Effect of polymer matrix on the rheology of hydroxyapatite-filled polyethylene composites 2002 Polymer Engineering and Science Joseph, R.;McGregor, W.J.;Martyn, M.T.;Tanner, K.E.;Coates, P.D.;Bonfield, W.; 10.1002/pen.10951
Rheological characterisation of hydroxyapatite filled polyethylene composites: Part 1 - Shear and extensional behaviour 2001 Plastics, Rubber and Composites Processing and Applications Joseph, R.;Martyn, M.T.;Tanner, K.E.;Coates, P.D.;Bonfield, W.;
Rheological characterisation of hydroxyapatite filled polyethylene composites: Part 2 - Isothermal compressibility and wall slip 2001 Plastics, Rubber and Composites Processing and Applications Joseph, R.;Martyn, M.T.;Tanner, K.E.;Coates, P.D.;Bonfield, W.;
Development of continuous die drawing production process for engineered polymer cores for wire ropes 2000 Plastics, Rubber and Composites Processing and Applications Taraiya, A.K.;Nugent, M.;Sweeney, J.;Coates, P.D.;Ward, I.M.;
Finite element simulation of geogrid manufacture using large deformation elastic formulation 2000 Plastics, Rubber and Composites Processing and Applications Caton-Rose, P.;Sweeney, J.;Collins, T.L.D.;Coates, P.D.;
In line melt temperature measurement during real time ultrasound monitoring of single screw extrusion 2000 Plastics, Rubber and Composites Processing and Applications Brown, E.C.;Olley, P.;Coates, P.D.;
In process measurement of apparent extensional viscosity of low density polyethylene melts using flow visualisation 2000 Plastics, Rubber and Composites Processing and Applications Martyn, M.T.;Groves, D.J.;Coates, P.D.;
In-process rheometry studies of LDPE compounds: Part II: Magnesium hydroxide filled 2000 International Polymer Processing Kelly, A.L.;Woodhead, M.;Coates, P.D.;Barnwell, D.;Martin, K.;
Glass fibre orientation within injection moulded automotive pedal Simulation and experimental studies 2000 Plastics, Rubber and Composites Processing and Applications Whiteside, B.R.;Coates, P.D.;Hine, P.J.;Duckett, R.A.;
In-process rheometry studies of LDPE compounds: Part I: Unfilled resin 2000 International Polymer Processing Kelly, A.L.;Woodhead, M.;Coates, P.D.;Barnwell, D.;Martin, K.;
In process monitoring of polymer batch to batch variation in injection moulding 2000 Plastics, Rubber and Composites Processing and Applications Kelly, A.L.;Woodhead, M.;Rose, R.M.;Coates, P.D.;
Gas assisted injection moulding Finite element modelling and experimental validation 2000 Plastics, Rubber and Composites Processing and Applications Johnson, L.;Olley, P.;Coates, P.D.;
Infrared sensor melt temperature measurement technology and benefits for thermoplastic injection molding process control 1999 Journal of Injection Molding Technology Speight, R.G.;Rose, R.M.;Coates, P.D.;
High-Temperature Large Strain Viscoelastic Behavior of Polypropylene Modeled Using an Inhomogeneously Strained Network 1999 Journal of Applied Polymer Science Sweeney, J.;Collins, T.L.D.;Coates, P.D.;Duckett, R.A.;
Ultrasound: A virtual instrument approach for monitoring of polymer melt variables 1999 Journal of Reinforced Plastics and Composites Brown, E.C.;Collins, T.L.D.;Dawson, A.J.;Olley, P.;Coates, P.D.;
Application of the Taguchi method for consistent polymer melt production in injection moulding 1998 Proceedings Of The Institution Of Mechanical Engineers, Part B: Journal Of Engineering Manufacture Khoshooee, N.;Coates, P.D.;
Organizing for Innovation: Loose or Tight Control? 1998 LONG RANGE PLANNING Butler, R.J.;Price, D.H.R.;Coates, P.D.;Pike, R.H.;
Sensitivity of in-line rheometry for extrusion of Mg(OH)2filled LDPE compounds 1998 International Polymer Processing Coates, P.D.;Rose, R.M.;Woodhead, M.;Kelly, A.L.; 10.3139/217.980172
In-line process monitoring for injection moulding control 1997 Proceedings Of The Institution Of Mechanical Engineers, Part E: Journal Of Process Mechanical Engineering Speight, R.G.;Coates, P.D.;Hull, J.B.;Peters, C.;
Measuring the development of fibre orientation during the melt extrusion of short glass fibre reinforced polypropylene 1997 Composites Part A: Applied Science and Manufacturing Hine, P.J.;Tsui, S.-W.;Coates, P.D.;Ward, I.M.;Duckett, R.A.;
Application of an elastic model to the large deformation, high temperature stretching of polypropylene 1997 Polymer Sweeney, J.;Collins, T.L.D.;Coates, P.D.;Ward, I.M.;
Large deformations of semicrystalline polymer modeled using the necking network concept 1997 Journal of Engineering Materials and Technology, Transactions of the ASME Sweeney, J.;Collins, T.L.D.;Coates, P.D.;Unwin, A.P.;Ward, I.M.;
An approximation to the KBKZ constitutive equation 1997 Journal of Non-Newtonian Fluid Mechanics Olley, P.;Coates, P.D.;
Off line and in process converging flow measurements for polyethylene melts 1997 Plastics, Rubber and Composites Processing and Applications Groves, D.J.;Martyn, M.T.;Coates, P.D.;
Understanding melt compression can help program for flow front position 1997 British Plastics and Rubber Speight, R.G.;Coates, P.D.;Hull, J.B.;
Competitive strategies and new technology: An empirical investigation in the UK polymer processing industry 1996 R and D Management Butler, R.J.;Coates, P.D.;Pike, R.H.;Price, D.H.R.;Turner, R.S.;
Application of Raman spectroscopy for determining residence time distributions in extruder reactors 1996 Applied Spectroscopy Ward, N.J.;Edwards, H.G.M.;Johnson, A.F.;Fleming, D.J.;Coates, P.D.;
On line rheometry: Shear and extensional flows 1996 Plastics, Rubber and Composites Processing and Applications Kelly, A.L.;Coates, P.D.;Dobbie, T.W.;Fleming, D.J.;
Semi-automated image analysis of the true tensile drawing behaviour of polymers to large strains 1996 Journal of Materials Science Haynes, A.R.;Coates, P.D.;
Predicting the rheology of linear with branched polyethylene blends 1996 Rheologica Acta Groves, D.J.;McLeish, T.C.B.;Chohan, R.K.;Coates, P.D.;
Reactive extrusion of polymers 1995 Engineering plastics Brown, M.W.R.;Johnson, A.F.;Coates, P.;
In-process measurements for monitoring and control of gelation levels in UPVC compounding 1995 Plastics, Rubber and Composites Processing and Applications Coates, P.D.;Rose, R.M.;Wilkinson, B.;
Influence of reaction injection moulding (RIM) processing variables on the mechanical properties of a commercial linear segmented polyamide 1995 Plastics, Rubber and Composites Processing and Applications Long, S.D.;Dawood, I.;Coates, P.D.;Johnson, A.F.;
Some routes for tailoring of polymer properties through processing 1995 Chemical Engineering Research and Design Coates, P.D.;Davies, G.R.;Duckett, R.A.;Johnson, A.F.;Ward, I.M.;
Structural reaction injection moulding of polyethylene fibre reinforced epoxy composites 1995 Plastics, Rubber and Composites Processing and Applications Long, S.D.;Hine, P.J.;Coates, P.D.;Johnson, A.F.;Duckett, R.A.;Ward, I.M.;
Towards intelligent process control of injection moulding of polymers 1995 Proceedings Of The Institution Of Mechanical Engineers, Part B: Journal Of Engineering Manufacture Coates, P.D.;Speight, R.G.;
Intelligent processing. A quantum leap in quality control 1994 Materials World Coates, P.D.;
In-line characterization of polymer deformation in melt and solid phase processing 1994 Polymer Coates, P.D.;Haynes, A.R.;Speight, R.G.; 10.1016/0032-3861(94)90265-8
Reactive processing of polymers and composites 1993 Materials World Coates, P.D.;Johnson, A.F.;
Fourth international conference on polymer processing machinery 1991 High Performance Plastics Coates, P.;
Statistical process control and process measurement workshop 1991 High Performance Plastics Coates, P.;
Reactive processing of polymers for high performance products 1990 High Performance Plastics Coates, P.D.;Johnson, A.F.;
RRIM: Studies of steady injection flows in mixhead orifices 1988 Plastics and Rubber Processing and Applications Coates, P.D.;Sivakumar, A.I.;Johnson, A.F.;
DRAWING THICK SECTION POLYPROPYLENE AT HIGH STRAIN RATES. 1987 Plastics and Rubber Processing and Applications Coates, P.D.;Ellis, D.I.;Pourmahnaei, S.M.;
PRIM: EXPERIMENTAL STUDIES OF FLOW TRANSIENTS IN MIXHEADS. 1987 Plastics and Rubber Processing and Applications Coates, P.D.;Sivakumar, A.I.;Johnson, A.F.;
RRIM: RHEOLOGY OF GLASS-FILLED POLYOL SLURRIES AND POLYMERIC ISOCYANATE REAGENTS. 1987 Plastics and Rubber Processing and Applications Coates, P.D.;Sivakumar, A.I.;Johnson, A.F.;
DEVELOPMENTS IN REINFORCED REACTION INJECTION MOULDING FOR INCREASED PROCESSING FLEXIBILITY. 1986 Plastics and rubber international Coates, P.D.;Johnson, A.F.;
RRIM: MACHINE AND PROCESS MEASUREMENTS. 1984 Polymer Process Engineering Coates, P.D.;Sivakumar, A.I.;Johnson, A.F.;
RRIM: PROCESS MEASUREMENTS ON A COMPUTERIZED SMALL-SCALE MACHINE. 1983 Polymer Process Engineering Coates, P.D.;Sivakumar, A.I.;Johnson, A.F.;
INTRODUCTION TO REINFORCED REACTION INJECTION MOULDING. 1981 Plastics and Rubber Processing and Applications Coates, P.D.;Johnson, A.F.;
Neck profiles in drawn linear polyethylene 1980 Journal of Materials Science Coates, P.D.;Ward, I.M.; 10.1007/BF00550561
DIE DRAWING: SOLID PHASE DRAWING OF POLYMERS THROUGH A CONVERGING DIE. 1980 Society Of Plastics Engineers (Technical Papers) Coates, P.D.;Ward, I.M.;
An analysis of the mechanics of solid phase extrusion of polymers 1980 Journal of Materials Science Coates, P.D.;Gibson, A.G.;Ward, I.M.; 10.1007/PL00020069
Drawing of polymers through a conical die 1979 Coates, P.D.;Ward, I.M.;
Drawing of polymers through a conical die 1979 Polymer Coates, P.D.;Ward, I.M.; 10.1016/0032-3861(79)90024-7
HYDROSTATIC EXTRUSION OF POLYOXYMETHYLENE. 1978 J Polym Sci Polym Phys Ed Coates, P.D.;Ward, I.M.;
The plastic deformation behaviour of linear polyethylene and polyoxymethylene 1978 Journal of Materials Science Coates, P.D.;Ward, I.M.; 10.1007/BF00552903
Effect of screw configuration on the dispersion and properties of polypropylene/multiwalled carbon nanotube composite 2019 Polymer Composites Ezat, G.S.;Kelly, A.L.;Youseffi, M.;Coates, P.D.; 10.1002/pc.25280
Orientation direction dependency of cavitation in pre-oriented isotactic polypropylene at large strains 2018 Soft Matter Lu, Y.;Thompson, G.;Lyu, D.;Caton-Rose, P.;Coates, P.;Men, Y.; 10.1039/c7sm02446k
Structure and Property of Microinjection Molded Poly(lactic acid) with High Degree of Long Chain Branching 2018 Industrial and Engineering Chemistry Research Zhao, Z.-G.;Yang, Q.;Coates, P.;Whiteside, B.;Kelly, A.;Huang, Y.-J.;Wu, P.-P.; 10.1021/acs.iecr.8b01597
Enhanced dielectric properties of immiscible poly (vinylidene fluoride)/low density polyethylene blends by inducing multilayered and orientated structures 2017 Composites Part B: Engineering Lin, X.;Fan, L.;Ren, D.;Jiao, Z.;Coates, P.;Yang, W.; 10.1016/j.compositesb.2017.01.065
Mechanism of Hydrogen-Bonded Complex Formation between Ibuprofen and Nanocrystalline Hydroxyapatite 2017 Langmuir Ryabenkova, Y.;Jadav, N.;Conte, M.;Hippler, M.F.A.;Reeves-Mclaren, N.;Coates, P.D.;Twigg, P.;Paradkar, A.; 10.1021/acs.langmuir.6b04510
Improved dielectric performance of polypropylene/multiwalled carbon nanotube nanocomposites by solid-phase orientation 2016 Journal of Applied Polymer Science Lin, X.;Tian, J.-W.;Hu, P.-H.;Ambardekar, R.;Thompson, G.;Dang, Z.-M.;Coates, P.; 10.1002/app.42893
Fibrillation of chain branched poly (lactic acid) with improved blood compatibility and bionic structure 2015 Chemical Engineering Journal Li, Z.;Zhao, X.;Ye, L.;Coates, P.;Caton-Rose, F.;Martyn, M.; 10.1016/j.cej.2015.05.082
Structure evolution and orientation mechanism of long-chain-branched poly (lactic acid) in the process of solid die drawing 2017 European Polymer Journal Li, J.;Li, Z.;Ye, L.;Zhao, X.;Coates, P.;Caton-Rose, F.;Martyn, M.; 10.1016/j.eurpolymj.2017.03.005
High orientation of long chain branched poly (lactic acid) with enhanced blood compatibility and bionic structure 2016 Journal of Biomedical Materials Research - Part A Li, Z.;Ye, L.;Zhao, X.;Coates, P.;Caton-Rose, F.;Martyn, M.; 10.1002/jbm.a.35640
Thank you note 2017 Plastics, Rubber and Composites Coates, P.; 10.1080/14658011.2017.1344345
Flow-induced crystallization of long chain aliphatic polyamides under a complex flow field: Inverted anisotropic structure and formation mechanism 2015 Polymer (United Kingdom) Gao, Y.;Dong, X.;Wang, L.;Liu, G.;Liu, X.;Tuinea-Bobe, C.;Whiteside, B.;Coates, P.;Wang, D.;Han, C.C.; 10.1016/j.polymer.2015.07.029
Structure and blood compatibility of highly oriented poly(L-lactic acid) chain extended by ethylene glycol diglycidyl ether 2015 Polymer (United Kingdom) Li, Z.;Zhao, X.;Ye, L.;Coates, P.;Caton-Rose, F.;Martyn, M.; 10.1016/j.polymer.2014.11.035
Infrared melt temperature measurement of single screw extrusion 2015 Polymer Engineering and Science Vera-Sorroche, J.;Kelly, A.L.;Brown, E.C.;Coates, P.D.; 10.1002/pen.23976
Micro-contact reconstruction of adjacent carbon nanotubes in polymer matrix through annealing-Induced relaxation of interfacial residual stress and strain 2015 Journal of Applied Polymer Science Li, D.;Fei, G.;Xia, H.;Spencer, P.E.;Coates, P.D.; 10.1002/app.42416
Near infrared investigation of polypropylene-clay nanocomposites for further quality control purposes-opportunities and limitations 2015 Materials Witschnigg, A.;Laske, S.;Holzer, C.;Patel, R.;Khan, A.;Benkreira, H.;Coates, P.; 10.3390/ma8095272
Capillary study on geometrical dependence of shear viscosity of polymer melts 2014 Journal of Applied Polymer Science Lin, X.;Kelly, A.;Woodhead, M.;Ren, D.;Wang, K.;Coates, P.; 10.1002/app.39982
Drug loaded homogeneous electrospun PCL/gelatin hybrid nanofiber structures for anti-infective tissue regeneration membranes 2014 Biomaterials Xue, J.;He, M.;Liu, H.;Niu, Y.;Crawford, A.;Coates, P.D.;Chen, D.;Shi, R.;Zhang, L.; 10.1016/j.biomaterials.2014.07.060
Effect of Ultrasound on Molecular Structure Development of Polylactide 2014 Polymer - Plastics Technology and Engineering Bao, W.;Wu, H.;Guo, S.;Paradkar, A.;Kelly, A.;Brown, E.;Coates, P.; 10.1080/03602559.2014.886062
Process efficiency in polymer extrusion: Correlation between the energy demand and melt thermal stability 2014 Applied Energy Abeykoon, C.;Kelly, A.L.;Vera-Sorroche, J.;Brown, E.C.;Coates, P.D.;Deng, J.;Li, K.;Harkin-Jones, E.;Price, M.; 10.1016/j.apenergy.2014.08.086
Investigation of the process energy demand in polymer extrusion: A brief review and an experimental study 2014 Applied Energy Abeykoon, C.;Kelly, A.L.;Brown, E.C.;Vera-Sorroche, J.;Coates, P.D.;Harkin-Jones, E.;Howell, K.B.;Deng, J.;Li, K.;Price, M.; 10.1016/j.apenergy.2014.09.024
Preparation and in vivo efficient anti-infection property of GTR/GBR implant made by metronidazole loaded electrospun polycaprolactone nanofiber membrane 2014 International Journal of Pharmaceutics Xue, J.;He, M.;Niu, Y.;Liu, H.;Crawford, A.;Coates, P.;Chen, D.;Shi, R.;Zhang, L.; 10.1016/j.ijpharm.2014.09.026
Mussel-Inspired Antibacterial Hydrogel with High Cell Affinity, Toughness, Self-Healing and Recycling Properties for Wound Healing 2021 ACS Sustainable Chemistry and Engineering xxx 1. Deng, X., Huang, B., Wang, Q., Wu, W., Coates, P., Sefat, F., Lu, C., Zhang, W., Zhang, X. ACS PUBLICATION https://doi.org/10.1021/acssuschemeng.0c06672
Constitutive Modelling of Polylactic Acid at Large Deformation Using Multiaxial Strains. 2021 Polymers 13 Sweeney J;Spencer P;Thompson G;Barker D;Coates P; 2073-4360 10.3390/polym13172967
An experimental and simulation comparison of a 3-D abrupt contraction flow using the molecular stress function constitutive model 2021 Plastics, Rubber and Composites 50 18 - 34 Olley P.;Gough T.;Spares R.;Coates P.D. 1465-8011 10.1080/14658011.2020.1826195
Degradation and Characterisation of Electrospun Polycaprolactone (PCL) and Poly(lactic-co-glycolic acid) (PLGA) Scaffolds for Vascular Tissue Engineering. 2021 Materials 14 Bazgir M;Zhang W;Zhang X;Elies J;Saeinasab M;Coates P;Youseffi M;Sefat F; 1996-1944 10.3390/ma14174773
Tensile, rheological and morphological characterizations of multi-walled carbon nanotube/polypropylene composites prepared by microinjection and compression molding 2022 International Polymer Processing 37 45 - 53 Ezat G.S.;Kelly A.L.;Youseffi M.;Coates P.D. 0930-777X 10.1515/ipp-2021-4156
Fabrication and Characterization of PCL/PLGA Coaxial and Bilayer Fibrous Scaffolds for Tissue Engineering. 2021 Materials 14 Bazgir M;Zhang W;Zhang X;Elies J;Saeinasab M;Coates P;Youseffi M;Sefat F; 1996-1944 10.3390/ma14216295
Mold temperature- and molar mass-dependent structural formation in micro-injection molding of isotactic polypropylene 2022 Acta Polymerica 248 Xintong Zhao Tao Liao XiaoYang Phil Coates Ben Whiteside David Barker Glen Thompson Zhiyong Jiang Yongfeng Menab Elsevier https://doi.org/10.1016/j.polymer.2022.124797
Mold temperature- and molar mass-dependent structural formation in micro-injection molding of isotactic polypropylene 2022 Polymer 248 Xintong Zhao, Tao Liao, Xiao Yang, Phil Coates, Ben Whiteside David Barker Glen Thompson Zhiyong Jiang Yongfeng Men Elsevier https://doi.org/10.1016/j.polymer.2022.124797
Effect of solid-state shear milled natural rubber particle size on the processing and dynamic vulcanization of recycled waste into thermoplastic vulcanizate 2022 Sustainable Materials and Technologies not known J. R. Innes, B. Shriky, S. Allan, X. Wang, M. Hebda, P. Coates, B. Whiteside, H. Benkreira, P. Caton-Rose, C. H. Lu, Q. Wang, A. Kelly Elsevier https://doi.org/10.1016/j.susmat.2022.e00424
Effect of solid-state shear milled natural rubber particle size on the processing and dynamic vulcanization of recycled waste into thermoplastic vulcanizates 2022 Not known J. R. Innes, B. Shriky, S. Allan, X. Wang, M. Hebda, P. Coates, B. Whiteside, H. Benkreira, P. Caton-Rose, C. H. Lu, Q. Wang, A. Kelly
3D simulation of the Hierarchical Multi-Mode Molecular Stress Function constitutive model in an abrupt contraction flow 2022 Journal of Non-Newtonian Fluid Mechanics 304 P. Olley , T. Gough, R. Spares , P.D. Coates Elsevier https://doi.org/10.1016/j.jnnfm.2022.104806
Effect of solid-state shear milled natural rubber particle size on the processing and dynamic vulcanization of recycled waste into thermoplastic vulcanizates 2022 Sustainable Materials and Technologies Not known J. R. Innes, B. Shriky, S. Allan, X. Wang, M. Hebda, P. Coates, B. Whiteside, H. Benkreira, P. Caton-Rose, C. H. Lu, Q. Wang, A. Kelly 2214-9937 Elsevier https://doi.org/10.1016/j.susmat.2022.e00424
Reactive processing of poly(lactic acid)/poly(ethylene octene) blend film with tailored interfacial intermolecular entanglement and toughening mechanism 2022 Journal of Materials Science and Technology 98 Wenjun, He., Lin, Ye., Coates, P., Caton-Rose, F., Xiaowen, Z. Elsevier https://doi.org/10.1016/j.jmst.2021.04.051
Structure Evolution of Highly Oriented Poly(lactic acid)-b-poly(lactide-co-caprolactone) Block Copolymer during Two-Stage Solid Phase Hot Drawing 2022 Industrial and Engineering Chemistry Research 61 Yuan, Z., Liu, Y., Ye, L., Coates, P., Caton-Rose, F., Zhao, X. ACS Publications https://doi.org/10.1021/acs.iecr.1c04474